diff --git a/domain/sap10_calculator/rdsap/cert_to_inputs.py b/domain/sap10_calculator/rdsap/cert_to_inputs.py
index 69b46f15..cb33c153 100644
--- a/domain/sap10_calculator/rdsap/cert_to_inputs.py
+++ b/domain/sap10_calculator/rdsap/cert_to_inputs.py
@@ -206,6 +206,58 @@ _PUMPS_FANS_KWH_BY_MAIN_CATEGORY: Final[dict[int, float]] = {
                 # entry HP certs fell through to the 130 kWh/yr DEFAULT
                 # and over-billed £17/yr at electricity rate.
 }
+
+# SAP 10.2 Table 4f (page 174) — flue fan kWh for a gas-fired boiler
+# with fan-assisted flue (row "Gas boiler – flue fan"). Liquid-fuel
+# (oil) boilers use 100; gas-fired heat pumps and warm-air also 45.
+_TABLE_4F_GAS_FLUE_FAN_KWH: Final[float] = 45.0
+
+# SAP 10.2 Table 4f row "Solar thermal system pump, electrically
+# powered" — formula `[25 + 5×H1] × 2`. H1 is the solar collector
+# aperture area in m². For cert 000565 the lodged 3 m² flat-panel
+# array gives 2 × (25 + 15) = 80 kWh; without aperture lodging the
+# cohort fall-through uses a 3 m² default.
+_TABLE_4F_SOLAR_HW_PUMP_DEFAULT_H1_M2: Final[float] = 3.0
+
+
+def _table_4f_additive_components(epc: EpcPropertyData) -> float:
+    """Sum the SAP 10.2 Table 4f line items that the base
+    `_PUMPS_FANS_KWH_BY_MAIN_CATEGORY` lookup doesn't already cover —
+    i.e. components driven by per-cert lodgements rather than Main 1's
+    heating category alone.
+
+    Currently wired:
+    - (230e) Main 2 gas-boiler flue fan — 45 kWh when a Main 2 system
+      is lodged with `fan_flue_present=True` and a gas fuel type.
+      Cert 000565 (Main 1 HP + Main 2 gas combi via WHC 914) is the
+      first fixture exercising this.
+    - (230g) Solar HW pump — `[25 + 5×H1] × 2` per Table 4f. H1
+      defaults to 3 m² aperture (cert 000565 lodging) when the
+      schema doesn't carry the lodged value. TODO: parse the
+      Elmhurst §16 aperture area into the schema.
+
+    Not yet wired:
+    - (230a) MEV / MVHR — `IUF × SFP × 1.22 × V` per Table 4f +
+      Table 4g defaults. PCDB MEV / MVHR lookup table is not yet in
+      the codebase; defer to next slice.
+    - (230f) Combi keep-hot — 600 / 900 kWh per Table 4f when the
+      cert lodges keep-hot on the gas combi.
+    - (230b) Warm-air heating fans + (230c) for warm-air pump.
+    - (230h) WWHRS pump.
+    """
+    total = 0.0
+    details = epc.sap_heating.main_heating_details if epc.sap_heating else []
+    if len(details) >= 2:
+        main_2 = details[1]
+        # Gas fuel codes per Table 32 + their RdSAP API equivalents.
+        main_2_fuel_is_gas = main_2.main_fuel_type in {1, 2, 3, 5, 7, 9, 26, 27}
+        if main_2.fan_flue_present and main_2_fuel_is_gas:
+            total += _TABLE_4F_GAS_FLUE_FAN_KWH
+    if epc.solar_water_heating:
+        total += (
+            25.0 + 5.0 * _TABLE_4F_SOLAR_HW_PUMP_DEFAULT_H1_M2
+        ) * 2.0
+    return total
 # SAP10.2 Table 6d note 1: "average or unknown" overshading is the
 # default for existing dwellings. RdSAP doesn't lodge a per-dwelling
 # overshading code so §5 always uses AVERAGE → Z_L = 0.83.
@@ -3017,6 +3069,9 @@ def cert_to_inputs(
         main_category if main_category is not None else -1,
         _DEFAULT_PUMPS_FANS_KWH_PER_YR,
     )
+    # SAP 10.2 Table 4f (p.174) — additive components on top of the
+    # Main 1 category base. Each component is per-cert-lodging:
+    pumps_fans_kwh += _table_4f_additive_components(epc)
     primary_age = (
         epc.sap_building_parts[0].construction_age_band if epc.sap_building_parts else None
     )