A PasHub Manual-Entry electric boiler lodges "Direct acting" in its "Heating
System (Boiler):" age-band cell. `_PASHUB_MANUAL_BOILER_AGE_BAND_TO_TABLE_4B`
covers only gas/liquid Table 4b rows, so the descriptor resolved to None and the
boiler stayed uncoded — taking the generic 0.80 gas-boiler seasonal efficiency
AND, on a Dual meter, `_table_12a_system_for_main`'s None-fallback that bills the
whole main-heating load at the off-peak LOW rate. The two errors pull opposite
ways, so an identical mis-mapping over-rated one dwelling and under-rated another
(fixture 497712825571 +9.5 on a Dual meter; 461386632387 -6.2 on a Single meter).
A direct-acting electric "boiler with radiators" is SAP 10.2 Table 4a code 191
(direct-acting electric boiler, efficiency 1.00, §12 Rule 3 tariff). Code it
directly in the manual-boiler resolver (gated on fuel Electricity + no PCDB
product), so the single code value drives the efficiency table, the Table 12a
pricing row and the tariff dispatch together. Both fixtures converge:
497712825571 → +0.6, 461386632387 → +0.4. LRHA within-0.5 52.4% → 53.4%,
MAE 0.835. Renamed `_pashub_manual_boiler_table_4b_code` → `_pashub_manual_
boiler_code` (it now also returns the Table 4a electric code).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Clears the three non-table-add blocks tracked in #1639 plus a latent age-band
bug they surfaced. LRHA WAVE 3 cohort: 77 → 103 of 104 computing.
Block A (exact cylinder volume): a measured cylinder lodges its litres on a
separate "Exact cylinder volume:" line; parse it in the extractor, carry it on
WaterHeating.cylinder_volume_measured_l, route the "Exact cylinder volume" band
to SAP cylinder-size code 6, and thread the litres into SapHeating (the
calculator reads them only when the code is 6). Verified end-to-end on the real
166 L fixture.
Block B (Controls line-wrap): PasHub wraps a long "Controls:" value across two
PDF lines and _get_in read only the first, truncating the label so the mapper
missed its Table 4e code. Re-join the continuation when the value ends on a
conjunction/comma (grammatically incomplete) so "…room thermostat and TRVs"
matches the existing code 2314. Scoped to Controls: — the shared _get_in is
unchanged; a wider truncation audit is tracked separately.
Age-band normalisation: the heat_network_age_band '2007 - 2011' block was one
facet of a broader bug — PasHub lodges the construction age band in mixed
templates ("K: …" prefixed, tight "1991-1995", space-padded "2007 - 2011") and
only the letter form was normalised, so bare year ranges were SILENTLY
MIS-RATED by the age-band-keyed U-value/DLF cascades. Normalise every template
to its RdSAP letter in _extract_age_band: unblocks the heat-network dwellings
AND corrects ~30 already-computing fixtures (within-0.5 42.9% → 49.5%,
MAE 3.05 → 1.02). Sibling Guinness cohort unchanged (82.9% / 0.36).
Block C (gable 'None') was already resolved on main — no change needed.
Fixture 461178278096 lodges no main heating at all (MissingMainFuelType);
tolerated as a known gap in the harness and ticketed (#1680) for the modelling
decision. LRHA ratchets re-baselined to the corrected cohort (0.49 / 1.05).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A cert lodging its horizontal dimensions measured externally
(measurement_type=2) must have its floor area and exposed perimeter converted to
internal dimensions before any SAP use (RdSAP 10 §3.4 + Table 2, p.17-18).
measurement_type was read nowhere (the `# What is this?` field), so external
certs carried a TFA ~11-15% too large — inflating occupancy and understating
every per-m2 output (CO2/m2, PE/m2).
Plumb measurement_type onto EpcPropertyData, and add a post-mapping
_with_internal_dimensions step: compute ONE whole-dwelling area/perimeter ratio
from the ground-floor footprint via the Table 2 built-form equation (§3.4 Note 4
— not a per-storey conversion, which over-corrects multi-part mid-terraces),
apply it to every storey's area/perimeter, reduce party walls by 2w (Note 5),
and refresh total_floor_area_m2 (read for occupancy N). Wall thickness w is the
lodged main-dwelling value, else the Table 3 default (p.19). Room-in-roof floor
area is always internal (§3.1) and left untouched. Scoped to the RdSAP-Schema
reduced-data family (17.0-21.x) where per-storey external dims are the lodgement
standard; legacy SAP-Schema-15.0/16.x are plumbed but not converted.
Corpus: within-0.5 81.0% -> 81.2%, MAE 0.571 -> 0.570, PE 2.5 -> 2.4. Cert
100091435353 TFA 128.7 -> 111.6 (lodged 112), SAP 66.23 -> 65.33 (+1.2 -> +0.3);
mean |dSAP vs lodged| over the 12 external certs 0.556 -> 0.429. Closes#1669.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On the gov-EPC API path a window's metal frame was unrepresentable: both
transmission tables were frameless (U_pvc, g, 0.70), so a cert lodging a metal
frame (pvc_frame:"false", RdSAP input 6-5) was billed at the PVC/wooden U and
frame factor 0.70 — over-rating metal-framed dwellings.
Add the RdSAP 10 Table 24 metal U-column (PDF p.50-51; mirrors u_window's metal
values) and a pvc_frame dimension to _api_glazing_transmission: an explicit
"false" routes the window to the metal U + SAP 10.2 Table 6c frame factor 0.8;
"true"/None/other keep the PVC column + 0.70, so no PVC cert regresses.
Secondary glazing keeps its frame-independent U (only FF changes). Wired into
_api_sap_window and _api_sap_roof_window (both full-schema, lodge pvc_frame);
the reduced-field path has no pvc_frame and is unchanged.
Spec: RdSAP 10 Table 24 metal column, SAP 10.2 Table 6c, RdSAP input 6-5 (p.80).
Corpus: within-0.5 80.6% -> 81.0%, MAE 0.578 -> 0.571. Cert 21067296
68.60 -> 66.96 (toward lodged 67). Closes#1667.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The gov-EPC API lodges a two-main dwelling's main_heating_fraction pair in
two incompatible encodings — a decimal fraction summing to ~1.0 ([0.8, 0.2])
or an integer percent summing to ~100 ([80, 20]) — while every consumer
divides by 100 unconditionally. A decimal pair therefore collapsed the second
main's share to ~1% of its true value, billing almost the whole load to the
first system's fuel/efficiency.
Normalise once at the mapper via a shared pair-sum discriminator
(_normalised_main_heating_fraction): a genuine two-main split summing nearer
1.0 than 100 is scaled to percent; a percent pair and any single main are left
exactly as lodged, so the 3 percent-encoded corpus certs do not regress. Wired
across the seven from_rdsap_schema_* branches and the SAP-17.1 path, whose old
int(fraction) floor silently deleted a decimal-lodged second main (int(0.35)=0).
Spec: RdSAP 10 item 7-5 (percent is canonical), p.81. Corpus: within-0.5
80.3% -> 80.6%, MAE 0.584 -> 0.578. Example cert 10070086972 17.59 -> 18.73
(toward lodged 18). Closes#1666.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RdSAP 10 item 2-3(h) "another dwelling above" is U=0 (spec p.45: "There is no
heat loss through the roof of a building part that has the same dwelling above
or another dwelling above"). gov-API `roof_construction = 3` is that code, but
the mapper labelled it "Pitched (slates/tiles), no access to loft" (which is
code 5), so the per-part party override at heat_transmission.py:1172 never
matched and the part fell through to the dwelling_type-label-only
has_exposed_roof heuristic.
190 of the 200 corpus code-3 parts sit at index 0 and are already suppressed by
`_cert_lodges_exposed_roof` off the roof_insulation_location == "ND" signal. The
unmitigated set is the 10 parts at index > 0, where extensions default to
exposed and were billed a phantom pitched roof. Also removes a latent PV defect:
the bogus "Pitched" prefix satisfied `is_pitched` and divided PV array area by
cos(35 deg), inflating kWp.
Shipped with the stairwell fix so the corpus pin moves once: within-0.5
78.8% -> 79.6%, SAP MAE 0.626 -> 0.611, PE MAE 2.9 -> 2.7.
The roof change alone trades 4 certs out of the +-0.5 band for 2 in (one moving
4.4 SAP closer). Those 4 were investigated and are NOT a masked bug: the corpus
error distribution is symmetric (mean +0.076, median +0.03, sigma 1.606; 112
certs above +0.5 vs 102 below), ground-floor flats show 7 positive / 8 negative
with no excess over the null, and closing them needs HLC changes of 2.3-5.6% —
below the ~8.8% noise floor of the RHI anchor, calibrated on the 76 certs whose
SAP is exact (space-heating ratio 1.062 +/- 0.088).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
All six are `from_site_notes`-only (gov-API RdSAP corpus unmoved at 78.9%),
graded against the DB PasHub-assessment oracle (energy_rating_current,
source='lodged'), not the surveyor-entered pre_sap.
A. Manual-Entry boiler efficiency. Extractor read PCDF-Search columns that a
manual survey lacks; mapper returned None for all boilers → the generic
0.80 gas default. Now read `Type of boiler:` / `Heating System (Boiler):`
/ `Is there an open flue?` and resolve the descriptor to its SAP 10.2
Table 4b code. Moves all 7 Wythenshawe manual boilers to the oracle
(4a Hollyhedge back boiler 63.6→53.4=53; group MAE 2.42→0.42).
B. Room-in-roof gable type None → strict-raise. A form variant omits the
gable-type line (genuine field-absence); default None → party `gable_wall`
(U=0.25), mirroring `_api_type_1_gable_kind(None)`. Present-but-unknown
labels still strict-raise. Unblocks 8 & 34 Bucklow Drive.
C. Secondary `Closed room heater` unmapped → add Table 4a code 633.
Unblocks 8 Brinkshaw Avenue.
D. Alternative-wall insulation thickness never extracted → parse
`Wall insulation thickness:` and pass it through instead of the RdSAP 10
§5.4 100 mm favourable default.
E. `Number of heated rooms?` label mismatch → the PDF lodges
`Please enter the number of HEATED rooms:`.
F. HW cylinder thermostat dropped (NEW, systematic). `_map_sap_heating`
never set `cylinder_thermostat`, so a surveyed thermostat defaulted None
and the calculator applied the SAP 10.2 Table 2b Note a) ×1.3 penalty.
Map it ("Y"/"N", gated on a lodged cylinder) as the Elmhurst path does.
Fixes the two worst DB-oracle under-raters (52 Bucklow 59.4→61.8=62;
13 Kerne Grove 65.0→67.1=67).
DB-oracle cohort (148 matched): within-0.5 83.8%→87.8%, MAE 0.427→0.303.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A mid-terrace / enclosed-mid-terrace (built_form 4/6) has external walls on
its two opposite (front/rear) faces only (RdSAP 10 §1.1, p.7-8); both end/
gable elevations — and their room-in-roof continuations — abut a neighbour
and are party walls (§1.4.3, p.9). The gov-API path is built_form-blind, so a
cert lodging an "Exposed" RR gable (`gable_wall_type=1`) on such a form had it
billed at the masonry main-wall U (~2.5) instead of the party 0.25 (Table 4,
p.22), over-counting fabric heat loss and under-rating the dwelling.
`_api_type_1_gable_kind` now takes `built_form` and reclassifies an Exposed RR
gable to Party on the both-ends-party forms {4, 6} only; end-terrace {3, 5},
semi {2} and detached {1} keep their genuine exposed gable. The API path lodges
no per-gable U, so this only ever overrides a cascade fallback.
Corroborated three ways: RdSAP §1.1 + Table 4; S10TP-05 Appendix A (a
mid-terrace's roof-gable junction length is zero); and three accredited
Elmhurst mid-terrace worksheets (000477/000480/000516), which all lodge Party
gables. Those worksheets run the site-notes path (already correct) so the 195
Elmhurst pins are untouched.
Corpus (RdSAP-21.0.1, 1000 certs): within-0.5 78.8% -> 79.5%, SAP MAE
0.625 -> 0.599, PE MAE 2.85 -> 2.71, CO2 MAE 0.070 -> 0.068. Cert
100040550095 -10.13 -> +0.37; the 18-cert terraced-external-gable cohort mean
-1.94 -> +0.11; end-terrace/semi/detached untouched. Thresholds ratcheted.
Tests: new test_mapper_rir_gable_terraced (9); 195 Elmhurst pins, 288
cert_to_inputs/real-cert pins, 54 mapper tests, and the corpus gauge all green;
no new pyright errors.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
#1631: the label blocks in the main room-heater type table (Heating
System (Other) field), not the secondary table the issue cited — same
PCDB row either way. Wythenshawe 164→165 computed. The fixture scores
49.5 vs pre_sap 31: its own 2025 accredited cert
6890-0597-0722-0196-3943 lodges the identical codes (603/26/2601) at
band E agreeing with us, while pre_sap matches the dwelling's
superseded electric configuration (2017/2023 certs, band F) — accepted
divergence, MAE ceiling re-baselined 0.75→0.85 with the citation.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1628: fixture 500796700868 re-blocks on a later label
(first-exception-hit); metrics unchanged, ratchets hold.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Follow-on surfaced by #1626: fixture 500796646644 progressed past the
2404 conflict onto cylinder insulation 'Loose jacket' → code 2 (gov-API
coding, Elmhurst 'Jacket' sibling). Wythenshawe 161→162 computed
(32.6 vs pre 34); ratchets hold at 75.3%/0.744.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1626: ground truth resolved per the issue's option 3. The accredited
cert 0764-2894-7173-2720-5535 (62 Mayfair Road, UPRN 77066640 — the
blocked Wythenshawe fixture's dwelling) lodges 402 + 2402 for the same
heater description, and RdSAP 10 p.80 (item 7-3) requires a PCDB index
for any HHR lodgement — absent one, the surveyed type field is
authoritative and 2404 downgrades to 2402 (automatic charge control,
preserving the tick's automatic-charging semantics). Applies only to
the mapped non-HHR types (402/404); any other pairing still fails loud.
LRHA fixture 505091686590 (Fan storage heater, same slip) computes
64.0 vs pre 65; LRHA 76→77 computed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1625: 'Same dwelling below' → the "(another dwelling below)" party-
floor suppression string, mirroring the gov-API code-8 precedent
(RdSAP 10 §3: an internal floor between heated storeys has no floor
heat loss). Wythenshawe 151→161 computed; 7/10 newly-unblocked land
within 0.5 — ratchets re-baselined 0.76/0.72 → 0.75/0.75 for the two
tail entries (−3.3/−5.5).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1624: Wythenshawe 149→151 computed. 500767954156 lands within 0.5;
500797465814 is a −8.8 tail entry — MAE ceiling re-baselined 0.67→0.72
per the coverage-growth convention (within-0.5 floor 0.76 holds).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1637: 'MV - Heat Recovery' → MVHR kind (Table 4g default 46.2% heat
recovery — PasHub lodges no PCDF product/wet-rooms/duct data, so these
land in the accuracy tail as the issue predicts). Unblocking them
surfaced 4 biomass heat networks whose fuel label 'Heat from boilers -
biomass' passed through raw to the calculator's MissingMainFuelType —
now mapped to Table 12 code 43, and any other uncovered community fuel
strict-raises UnmappedPasHubLabel at the boundary (ADR-0015).
LRHA 61→76 computed / 28 blocked / 0 errored, within-0.5 43.4%,
MAE 2.985 — ratchets hold.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1636: the 6 single-line-label fixtures unblock and re-block on later
labels (MVHR/cylinder); the 6 line-wrap-truncated '…room thermostat
and' fixtures still need the extractor fix tracked under #1622.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#1635: 'Programmer, room thermostat and TRVs' on a heat pump → 2210
(PCDB heat_pump_controls), and the lodgement now carries Table 4a
category 4 — without it the calculator's Appendix N3.6/N3.7 gate never
fired and the PCDB heat pump was billed as 100%-efficient direct
electric (6.0/18.5 vs pre 62/57). With the category threaded the two
LRHA WAVE 3 fixtures score 52.1/56.9 (the latter within 0.5).
LRHA 59→61 computed, within-0.5 42.6%, MAE 2.830 — ratchets hold.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Positive input ventilation sourced from the loft is treated as natural
ventilation under SAP 10.2 §2 (24d) — matching the MechanicalVentilationKind
.NATURAL contract — so the label now resolves instead of raising
UnmappedElmhurstLabel and blocking the whole Elmhurst Summary. Surfaced on
8 WCHG Elmhurst certs (e.g. 29 Piper Hill Avenue, 38 Bucklow Drive).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Teaches the pashub `from_site_notes` mapper the electric-storage-heater and
room-heater families, following the existing boiler/heat-network split exactly
(fix at the mapper boundary, ADR-0015 — never mis-rate, never strict-raise deep
in the calculator). Adds:
- Table 4e Group 4 storage charge-control codes (2401/2402/2404) and Group 6
room-heater control codes (2602/2605), each gated on its own system group so a
control label never takes a wrong-group 2xxx code.
- The Table 4a system code from the surveyed heater type lodged in the "Heating
System (Other)" field (`community_heat_source`): Fan storage 404, slimline
402, PCDF-Search product ⇒ HHR 409 (RdSAP 10 p.80), room heaters 691/694.
- A 2404⇔409 coherence guard: high-heat-retention controls on a non-HHR storage
type is a surveyor contradiction and fails loud rather than rating a mismatch.
All codes taken from the SAP 10.2 spec (14-03-2025 PDF) and already present in
the calculator's inventories — no calculator change.
LRHA WAVE 3 (lincs rural) accuracy: 8 computed / 96 blocked → 45 computed / 59
blocked / 0 errored (within-0.5 46.7%, MAE 2.989); ratchets re-baselined to the
new coverage. Guinness cohort (208) + gov-API corpus unchanged; pyright --strict
adds zero new errors.
Closes#1619
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`_PASHUB_FLOOR_EXPOSURE` mapped the surveyed "Semi Exposed (unheated)"
floor label to `is_above_partially_heated_space` (RdSAP §5.14, constant
U=0.7). A floor semi-exposed to an enclosed UNHEATED space belongs in
§5.13 Table 20 `u_exposed_floor` (band-B as-built U=1.20). §5.14's U=0.7
is reserved for a floor above a *partially* heated space. #1602
transposed the two branches; the too-low U under-counted floor loss on
the 9 label-carrying cohort fixtures → a shared over-credit.
Triangulated against all three siblings + the calculator docstring: the
gov-API code-2 "To unheated space" (mapper.py:4797) and Elmhurst
`_is_floor_exposed_to_unheated_space` (mapper.py:5970) both route to
Table 20; rdsap_uvalues.py:1416 documents Table 20 as collapsing exposed
and semi-exposed-to-unheated into one lookup. One-line data flip,
from_site_notes-only (gov-API RdSAP corpus untouched, still 78.9%).
Adjacent Ronald St mid-terrace pair (the clustered signal): 10 Ronald
60.35→59.02 (oracle 59), 12 Ronald 60.79→59.36 (oracle 59). Cohort vs
DB oracle (portfolio 838 effective_sap) 83.3%→86.9% within-0.5, MAE
0.377→0.348, no built form regresses, all 7 verified dwellings unchanged
(none carry the label). pashub harness 79.5%→82.4%, MAE 0.389→0.367;
ratchets tightened 0.78→0.82 / 0.40→0.37. pyright zero-new.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Electric-immersion DHW: bill at 100%, not the space boiler's efficiency 🟩
A separate electric immersion heater (SAP water-heating code 903) is 100%
efficient (SAP 10.2 Table 4a) and the space-heating boiler provides no water
heating, so Appendix D2.1 Eq D1 (the boiler seasonal-efficiency cascade) must
not apply to it. But `_water_heating_main` resolves DHW to the SPACE main — a
gas/oil boiler keeps its PCDB record — so three water-efficiency branches in
cert_to_inputs billed the immersion-heated cylinder at the boiler's ~87% summer
efficiency (a mongrel: electric fuel price x gas-boiler efficiency):
1. the scalar `water_eff = water_pcdb_main.summer_efficiency_pct / 100`,
2. the SAP §9.4.11 / Table 4c(2) -5pp no-interlock adjustment, and
3. the Eq D1 (winter, summer) seasonal pair from `pcdb_main`.
Gate all three on `not dhw_is_electric_immersion`; the correct immersion path
(`_water_efficiency_with_category_inherit` -> 1.0, Eq D1 off) then applies,
mirroring the Table 3 zero-primary-loss gate already present for WHC 903.
General bug — fires for any WHC-903 dwelling whose space main is a PCDB gas/oil
boiler. It surfaced via the PasHub campaign's #1600 no-water-heating default
(WHC 999 -> 903) on a gas-combi dwelling: 58 Hackle St M11 4WU, SAP 55.30 ->
57.67 (pre_sap 58, verified 59).
Guardrails: the gov-API RdSAP corpus IMPROVES 78.8% -> 78.9% within-0.5, MAE
0.625 -> 0.622 (a handful of corpus certs with a boiler space main + electric
immersion move closer to accredited) — MAE ceiling ratcheted 0.626 -> 0.625.
Regression pinned in test_cert_to_inputs (RED before / GREEN after). pyright
0-new (cert_to_inputs baseline 30).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub SAP accuracy: thread low-energy lights + draught lobby (from_site_notes) 🟩
Two systematic silent-drops in the PAS Hub `from_site_notes` path, each a field
the gov-API/Elmhurst mappers thread but site-notes dropped, letting a favourable
default reach the SAP-10.2 calculator. Validated against the correct pashub
oracle (property_baseline_performance.effective_sap_score, portfolio 838):
cohort within-0.5 55.1% → 62.6%, MAE 0.599 → 0.521.
- Low-energy lights: when "exact LED/CFL known = No", PAS Hub lodges an aggregate
"Number of fixed low energy lights?" count. Previously dropped (no dataclass
field / extractor key / mapper thread) → calculator saw 0 low-energy bulbs and
applied the pessimistic L5b/L8c no-data default, under-rating SAP. Now threaded
into low_energy_fixed_lighting_bulbs_count, mirroring from_elmhurst_site_notes.
~6% of the cohort; resolves 58 Hackle (−0.43 vs oracle 59 with #1615).
- Draught lobby: _map_sap_ventilation set only the legacy `draught_lobby` field,
never the canonical `has_draught_lobby` §2 (13) gate the cascade reads, so the
surveyed lobby was ignored and infiltration over-stated. Now mirrors Elmhurst.
Two other audited levers were REJECTED against the pashub oracle (they matched
the gov-cert/RdSAP convention but pashub does not apply them): percent_draughtproofed
(cohort 30.8%) and the §A.2.2 assumed secondary heater (19.2%). A heat-network
control-code fix (2306→2303 for 16 Bingley) is HELD pending spec/Elmhurst
adjudication — it contradicts ADR-0053; see the NOTE on _PASHUB_HEAT_NETWORK_CONTROL_TO_SAP10.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub heat-network control: room-thermostat-only maps to 2308, not 2306 🟩
The Table 4e Group 3 label "charging linked to use of community heating, room
thermostat only" was mapped to 2306 — the linked-to-use *with-TRVs* code
(control type 3, space charging 1.00). The label explicitly excludes TRVs, so
it is control type 2 / space 1.05 = code 2308/2309 (linked-to-use → DHW 1.00).
2306 asserted TRVs the survey doesn't have and over-rated the cohort's sole
heat-network dwelling (16 Bingley Close 56.89 → 54.01 vs pashub oracle 52).
Verified against SAP 10.2 Table 4e as encoded in cert_to_inputs.py
(_CONTROL_TYPE_BY_CODE 2308→2, space-charging 2308→1.05, DHW 2308→1.00) and the
RdSAP control-label vocabulary in MainheatControlAttributes.py. 2303 (the earlier
audit's guess) is rejected: it is a flat-rate code (DHW 1.05) whose oracle match
was a coincidence of two offsetting spec violations. The residual +2.0 to oracle
52 is the documented SAP-10.2-engine-vs-lodged offset, not a fuel/flags gap
(those were threaded by the #1590 follow-up) — supersedes the ADR-0053 /
HANDOVER_838 "community fuel/flags" attribution.
16 Bingley is the only heat-network fixture in portfolio 838, so this moves one
fixture strictly toward its oracle. Harness ratcheted: within-0.5 0.51→0.58,
MAE 0.625→0.521 (observed 58.5% / 0.520 with all three 2026-07-15 levers).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub SAP accuracy: restore 3 dropped §2 infiltration inputs (from_site_notes)
`from_site_notes` uniquely dropped three ventilation inputs that the gov-API
and Elmhurst sibling mappers all set, causing a systematic cohort-wide SAP
under-rate vs the company's own accredited SAP-10.2 certs
(property_baseline_performance.effective_sap_score, portfolio 838):
1. percent_draughtproofed — never set, so §2(15) window infiltration was
pinned at its 0.25-ACH worst case on every dwelling. Reconstructed as the
area-weighted % of draught-proofed windows (mirrors Elmhurst
`draught_proofing_percent`). Dominant term.
2. Upper-storey +0.25 m joist void — omitted; now added, matching
`_UPPER_FLOOR_HEIGHT_ADD_M` on the gov-API/Elmhurst paths. This
RE-ADJUDICATES #1601 ("keep raw"): that call was confounded by the
then-present draught-proofing drop suppressing every verified dwelling.
3. sheltered_sides — left None → calculator's flat default of 2, which
over-shelters end/semi/detached (RdSAP §S5 = 1/1/0). Now derived from
built form.
The three are NON-ADDITIVE — each overshoots alone (which is why all three
were previously rejected individually) — but together they land all 7
verified ground-truth dwellings toward truth (none regress) and every built
form near zero. Cohort 62.1% -> 83.3% within-0.5, MAE 0.507 -> 0.377.
Guardrails: gov-API RdSAP corpus unchanged (78.9%, these are from_site_notes-
only helpers). pashub harness 58.5% -> 79.5% / MAE 0.520 -> 0.389; ratchets
tightened 0.58->0.78 and 0.521->0.40. pyright zero-new (mapper baseline 39).
New focused tests in TestFromSiteNotesInfiltrationFixes cover all three
fields incl. area-weighting and the built-form shelter map; goldens updated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Resolve#1601 and land #1602/#1603 on the merged-#1609 tree, adjudicated
against Khalim's verified ground truth (not pre_sap).
#1601 (upper-floor +0.25 m joist void) — RESOLVED as keep-raw. The
gov-API/Elmhurst mappers add 0.25 m to upper-storey heights because their
lodged height is a clear internal ceiling. Against verified truth RAW beats
+0.25 on all 7 verified dwellings (16 Stillwater raw -0.35 within-band vs
+0.25 -0.75; every verified property is already under truth and +0.25 only
lowers SAP). pashub surveys internal dimensions (202/205 "Measurements
Location: Internal") and its upper-ground height gap is modal 0.00, so the
joist void is not differentially present and a blanket +0.25 is unsafe.
_map_floor_dimensions keeps the raw surveyed height with a RESOLVED note.
#1602 — semi-exposed / exposed floor exposure. The surveyed "Floor type"
"Semi Exposed (unheated)" now sets is_above_partially_heated_space (RdSAP
§5.14 U=0.7) and "Exposed Floor" sets is_exposed_floor (§5.13 Table 20), on
the lowest storey (floor==0) only, mirroring the gov-API/Elmhurst siblings.
New strict-raise _pashub_floor_exposure (ADR-0015).
#1603a — alternative walls. New AlternativeWall survey dataclass +
extract_alternative_walls (the "Alternative Wall"->"Windows" section) +
_map_pashub_alternative_walls -> sap_alternative_wall_1/2. The cascade
deducts each alt-wall area from the part's main opaque wall (no double
count), so a mixed-facade dwelling is billed at each sub-area's own
construction. The alt-wall block lodges "As Built" (capital B) — aliased to
the existing default insulation code.
#1603b — extension floor construction. ExtensionConstruction gains a floor
block (parsed like the main building) and _map_extension_building_part now
threads floor_type/construction/insulation/u_value_known, which the main
path already did and the extension silently dropped.
Cohort: within-0.5 50.2% -> 51.2%, MAE 0.652 -> 0.624, 0 strict-raise
errors across all 205. Verified-truth safe: none of the 7 verified
dwellings have alt walls, and #1602 moves the one it touches (2 Philips
exposed ext floor) by -0.00. pyright 0-new (mapper baseline 39). Goldens
test_full_building_construction + end_to_end EXTENSION_1 updated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
