Compose the party-ceiling and sloping-ceiling guards in the roof
GuardedColumnClassifier so a PitchedWithSlopingCeiling override resolves to the
Pitched, sloping ceiling family instead of being routed onto Pitched, N mm loft
insulation by the LLM (ADR-0066).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The service was the last one living wholly under backend/. It now follows
the same layering as abri and the other newer services:
domain/pashub_fetcher/ core file classification, subfolders
infrastructure/pashub_fetcher/ PasHub client, token getter, wire DTOs
orchestration/ PashubFetcherOrchestrator (was PashubService)
applications/pashub_fetcher/ lambda handler, trigger request, dev tooling
core_files.py is split along the layer boundary: the domain module keeps the
filename/evidence-category classification rules and no longer imports
infrastructure.postgres, while the CoreFiles -> FileTypeEnum translation moves
to infrastructure/pashub_fetcher/core_file_types.py.
Tests move into the tests/ tree by layer. Note this puts them in the only
suite CI currently runs (unit_tests.yml is disabled), so these 73 tests now
execute on PRs for the first time; they were previously reachable only via
the legacy pytest.ini testpaths.
sharepoint_renamer's image now copies just domain/pashub_fetcher/ rather than
the whole service, since SharepointSubfolders is all it needed.
Behaviour is unchanged. tests/ goes 9927 -> 10000 passed (+73, exactly the
tests that moved in); the legacy suite keeps its same 17 pre-existing failures
and 11 errors. tests/test_lambda_packaging.py confirms both changed
Dockerfiles still copy their handler's full import closure.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Wet underfloor responsiveness was pinned at R=0.75 for the lumped gov-EPC emitter
code 2, regardless of floor construction. SAP 10.2 Table 4d splits it three ways
and RdSAP 10 Table 29 (p.56-57) selects from floor construction + age band:
timber floor 1.0, screed above insulation 0.75, concrete slab 0.25. A
concrete-slab system (solid floor, age A-E) was billed as screed, over-stating
responsiveness (higher MIT) and over-rating the dwelling; R=0.25 was unreachable.
_responsiveness now takes the cert and, for the lumped underfloor code, derives
the Table 29 subtype via _underfloor_responsiveness from the main part's floor
construction + age band: suspended TIMBER -> 1.0; solid A-E -> 0.25 (concrete
slab); solid F-M / suspended-not-timber / unknown / no ground floor -> 0.75
(screed, the prior default, so ambiguous no-ground-floor certs do not move). The
mapper stays a pass-through.
Spec: SAP 10.2 Table 4d (p.170), RdSAP 10 Table 29 (p.56-57). Corpus: MAE
0.570 -> 0.565 (net toward lodged), within-0.5 81.2%. Cert 100100137438 (solid,
band B) 72 -> 69, exactly lodged. Closes#1668 on the API path.
NOTE: the issue's worksheet adjudication (run 100100137438 through accredited
Elmhurst to confirm concrete-slab R=0.25) is still outstanding — it corrects to
lodged 69 exactly, but is not yet Elmhurst-worksheet-confirmed. The Elmhurst
site-notes path (_resolve_elmhurst_underfloor_subtype still raises for solid A-E)
is untouched — no corpus/fixture exercises it; separate follow-up.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A second export selection alongside the per-Scenario one, chosen by
`plan_selection` on the export request:
- "scenario" (default, unchanged): one sheet per Scenario, freshest Plan per
(property, scenario); scenario_ids required.
- "default" (new): a single "Default Plans" sheet of each home's is_default
Plan (one-per-property across all Scenarios, ADR-0012/0017) — the portfolio's
current state, one row per home; scenario_ids ignored.
Repository gains `default_rows_for(portfolio_id, property_ids)`: same read-model
and Effective-EPC join as `rows_for`, with the plan-selection WHERE swapped from
`scenario_id = :scenario_id` to `is_default = TRUE`. Orchestrator branches on
plan_selection; the router validates it and only requires scenario_ids for the
scenario selection. A recipe without plan_selection defaults to "scenario", so
the change is backward-compatible.
Both selections now surface the chosen Plan's `name` as a `plan_name` column.
Tests: repository default_rows_for (scenario-independent selection, plan_name,
non-default excluded); orchestrator default path (one "Default Plans" sheet;
empty selection is a recorded failure). 62 passed, pyright --strict clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RdSAP 10 §5.9 "U-values of sheltered walls" (PDF p.43): a wall between a
flat/maisonette and an unheated buffer takes SAP 10.2 §3.3's U = 1/(1/U0 + Ru),
and Ru depends on the BUFFER TYPE — "Use Ru = 0.5 m²K/W for corridors and
Ru = 2.1 m²K/W for stairwell."
The buffer type is lodged on `SapFlatDetails.heat_loss_corridor` (0-based per
item 1-11, PDF p.70: 0 none, 1 heated, 2 unheated corridor, 3 unheated
stairwell). That field was read NOWHERE under domain/ — corridor presence was
inferred only from a lodged sheltered alternative wall — so every sheltered wall
took the corridor 0.5 and every stairwell flat over-billed its sheltered wall,
under-rating the dwelling.
Distinct from `_SHELTERED_GABLE_ADDED_RESISTANCE_M2K_W`, which is RdSAP 10
Table 4 (p.22) for a room-in-roof sheltered gable — same 0.5, different rule,
deliberately untouched.
Corpus gauge ratcheted UP: within-0.5 78.8% -> 79.8% (+10 certs), SAP MAE
0.626 -> 0.613, PE MAE 2.9 -> 2.8. Failure set and pyright count identical to
main. Portfolio 824 is stairwell-heavy (60 properties at code 3); property
749898 over-bills 4.44 W/K on a 48 m2 flat.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RdSAP 10 §3.12 (PDF p.26), the flats/maisonettes floor rules: "There is no heat
loss through the floor if there is another flat below. Otherwise the floor area
of the flat ... is ... a semi-exposed floor if there are unheated premises below
it (e.g. an enclosed garage) ... Semi-exposed (sheltered) floors are treated as
if they were fully exposed." §5.13 (p.48) confirms the U-value identity: Table 20
applies to exposed and semi-exposed alike.
API floor_heat_loss=2 -> floor_type "To unheated space" set no exposure signal,
so on a mid-/top-floor flat the dwelling-level heuristic (has_exposed_floor=False,
assuming a heated dwelling below) went unopposed and the ENTIRE floor was billed
at 0 W/K. 11 properties across portfolios 796+824, mean +4.02 SAP, 10 of 11
over-rating — we judged dwellings more efficient than the accredited assessment
and would withhold retrofit measures they need.
Exemplars: 750018 space heating -53.2% -> -8.1% vs the cert's own RHI figure,
SAP +8.22 -> +1.16; 749898 -43.0% -> +0.9%, SAP +6.29 -> -1.11.
SCOPED TO FLATS ON PURPOSE. §3.12 is the flats/maisonettes section, and the
accredited Elmhurst worksheet disagrees with Table 20 for a house: golden cert
7536-3827-0600-0600-0276 (detached) lodges floor_heat_loss=2 on its Main part and
the worksheet bills it on the BS EN ISO 13370 ground-floor cascade at U 0.97, not
Table 20's 1.20. An unscoped mapper-level fix broke that pin and the
uprn_100050881708 accuracy pin; the scoped fix leaves both untouched.
No regressions: identical failure set and pyright count vs main; the RdSAP-21.0.1
accuracy corpus gauge is unchanged at 78.8% within-0.5 / MAE 0.625 (correctly —
all 7 corpus certs lodging code 2 are houses).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "latest EPC per UPRN" selection ordered by e.id DESC, but row-id does not
track recency: a gov-EPC cert re-ingested after a PasHub survey lands with a
higher e.id, so the header/perf reads silently picked the stale gov cert (wrong
TFA, lodgement, property_type, current band) on 3 of portfolio 838. Order by the
effective lodgement date (registration -> completion -> inspection) DESC NULLS
LAST, e.id DESC tiebreak.
Compose the descriptive fabric from the structured SAP fields a re-survey lodges
(no gov-EPC prose): walls/roof/floor from the main epc_building_part, heating and
hot water from epc_main_heating_detail + the water-heating codes, decoded with
the SAP engine's own code space (fabric_description.py). Structured fabric wins
where present and falls back to the gov-EPC prose otherwise; windows and lighting
stay on prose (their per-element codes do not reconstruct the dwelling phrase).
Add built_form (epc_property, code-decoded) and property_age_band (building part
construction_age_band -> RdSAP date range) columns.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The deal's third_party_surveyor_identifier is now required by the log
and amend flows: the trigger contract rejects messages without it
(blank treated as missing, since a blank resource makes OpenHousing
silently drop the appointment), and LogJobRequest/AmendJobRequest carry
it as a required field. The ABRI_RELAY_DEFAULT_RESOURCE fallback and
its config/terraform/workflow wiring are removed as dead code.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Carry third_party_surveyor_identifier on the Abri trigger message and
through dispatch into the log and amend flows, booking the job against
that resource. LogJobRequest gains the optional resource field
AmendJobRequest already had; the client falls back to the configured
default surveyor when the deal names no third-party resource, so
existing deals behave unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When DHW is supplied by a community heat network (WHC 901/902/914 on a
heat-network main), the network heat -- space AND water -- bills at the main's
Table-12 heat-network rate. The STANDARD-tariff §10a cost path (_fuel_cost)
re-derived the DHW rate inline from the cert-lodged HW fuel, which Elmhurst
defaults to 'Mains gas' (Table 32 code 26, 3.48 p/kWh) on community certs --
under-costing DHW and over-rating SAP. Now inherits the main heat-network rate
via _fuel_cost_gbp_per_kwh, mirroring the .173 inherit already applied on the
legacy/off-peak HW-rate paths. Scoped to community heating, so all other certs
are unchanged; the RdSAP-21.0.1 corpus gauge improves 78.6%->78.9% within-0.5
(MAE 0.628->0.622) with all 195 Elmhurst worksheet pins green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Electric-immersion DHW: bill at 100%, not the space boiler's efficiency 🟩
A separate electric immersion heater (SAP water-heating code 903) is 100%
efficient (SAP 10.2 Table 4a) and the space-heating boiler provides no water
heating, so Appendix D2.1 Eq D1 (the boiler seasonal-efficiency cascade) must
not apply to it. But `_water_heating_main` resolves DHW to the SPACE main — a
gas/oil boiler keeps its PCDB record — so three water-efficiency branches in
cert_to_inputs billed the immersion-heated cylinder at the boiler's ~87% summer
efficiency (a mongrel: electric fuel price x gas-boiler efficiency):
1. the scalar `water_eff = water_pcdb_main.summer_efficiency_pct / 100`,
2. the SAP §9.4.11 / Table 4c(2) -5pp no-interlock adjustment, and
3. the Eq D1 (winter, summer) seasonal pair from `pcdb_main`.
Gate all three on `not dhw_is_electric_immersion`; the correct immersion path
(`_water_efficiency_with_category_inherit` -> 1.0, Eq D1 off) then applies,
mirroring the Table 3 zero-primary-loss gate already present for WHC 903.
General bug — fires for any WHC-903 dwelling whose space main is a PCDB gas/oil
boiler. It surfaced via the PasHub campaign's #1600 no-water-heating default
(WHC 999 -> 903) on a gas-combi dwelling: 58 Hackle St M11 4WU, SAP 55.30 ->
57.67 (pre_sap 58, verified 59).
Guardrails: the gov-API RdSAP corpus IMPROVES 78.8% -> 78.9% within-0.5, MAE
0.625 -> 0.622 (a handful of corpus certs with a boiler space main + electric
immersion move closer to accredited) — MAE ceiling ratcheted 0.626 -> 0.625.
Regression pinned in test_cert_to_inputs (RED before / GREEN after). pyright
0-new (cert_to_inputs baseline 30).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub SAP accuracy: thread low-energy lights + draught lobby (from_site_notes) 🟩
Two systematic silent-drops in the PAS Hub `from_site_notes` path, each a field
the gov-API/Elmhurst mappers thread but site-notes dropped, letting a favourable
default reach the SAP-10.2 calculator. Validated against the correct pashub
oracle (property_baseline_performance.effective_sap_score, portfolio 838):
cohort within-0.5 55.1% → 62.6%, MAE 0.599 → 0.521.
- Low-energy lights: when "exact LED/CFL known = No", PAS Hub lodges an aggregate
"Number of fixed low energy lights?" count. Previously dropped (no dataclass
field / extractor key / mapper thread) → calculator saw 0 low-energy bulbs and
applied the pessimistic L5b/L8c no-data default, under-rating SAP. Now threaded
into low_energy_fixed_lighting_bulbs_count, mirroring from_elmhurst_site_notes.
~6% of the cohort; resolves 58 Hackle (−0.43 vs oracle 59 with #1615).
- Draught lobby: _map_sap_ventilation set only the legacy `draught_lobby` field,
never the canonical `has_draught_lobby` §2 (13) gate the cascade reads, so the
surveyed lobby was ignored and infiltration over-stated. Now mirrors Elmhurst.
Two other audited levers were REJECTED against the pashub oracle (they matched
the gov-cert/RdSAP convention but pashub does not apply them): percent_draughtproofed
(cohort 30.8%) and the §A.2.2 assumed secondary heater (19.2%). A heat-network
control-code fix (2306→2303 for 16 Bingley) is HELD pending spec/Elmhurst
adjudication — it contradicts ADR-0053; see the NOTE on _PASHUB_HEAT_NETWORK_CONTROL_TO_SAP10.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub heat-network control: room-thermostat-only maps to 2308, not 2306 🟩
The Table 4e Group 3 label "charging linked to use of community heating, room
thermostat only" was mapped to 2306 — the linked-to-use *with-TRVs* code
(control type 3, space charging 1.00). The label explicitly excludes TRVs, so
it is control type 2 / space 1.05 = code 2308/2309 (linked-to-use → DHW 1.00).
2306 asserted TRVs the survey doesn't have and over-rated the cohort's sole
heat-network dwelling (16 Bingley Close 56.89 → 54.01 vs pashub oracle 52).
Verified against SAP 10.2 Table 4e as encoded in cert_to_inputs.py
(_CONTROL_TYPE_BY_CODE 2308→2, space-charging 2308→1.05, DHW 2308→1.00) and the
RdSAP control-label vocabulary in MainheatControlAttributes.py. 2303 (the earlier
audit's guess) is rejected: it is a flat-rate code (DHW 1.05) whose oracle match
was a coincidence of two offsetting spec violations. The residual +2.0 to oracle
52 is the documented SAP-10.2-engine-vs-lodged offset, not a fuel/flags gap
(those were threaded by the #1590 follow-up) — supersedes the ADR-0053 /
HANDOVER_838 "community fuel/flags" attribution.
16 Bingley is the only heat-network fixture in portfolio 838, so this moves one
fixture strictly toward its oracle. Harness ratcheted: within-0.5 0.51→0.58,
MAE 0.625→0.521 (observed 58.5% / 0.520 with all three 2026-07-15 levers).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* PasHub SAP accuracy: restore 3 dropped §2 infiltration inputs (from_site_notes)
`from_site_notes` uniquely dropped three ventilation inputs that the gov-API
and Elmhurst sibling mappers all set, causing a systematic cohort-wide SAP
under-rate vs the company's own accredited SAP-10.2 certs
(property_baseline_performance.effective_sap_score, portfolio 838):
1. percent_draughtproofed — never set, so §2(15) window infiltration was
pinned at its 0.25-ACH worst case on every dwelling. Reconstructed as the
area-weighted % of draught-proofed windows (mirrors Elmhurst
`draught_proofing_percent`). Dominant term.
2. Upper-storey +0.25 m joist void — omitted; now added, matching
`_UPPER_FLOOR_HEIGHT_ADD_M` on the gov-API/Elmhurst paths. This
RE-ADJUDICATES #1601 ("keep raw"): that call was confounded by the
then-present draught-proofing drop suppressing every verified dwelling.
3. sheltered_sides — left None → calculator's flat default of 2, which
over-shelters end/semi/detached (RdSAP §S5 = 1/1/0). Now derived from
built form.
The three are NON-ADDITIVE — each overshoots alone (which is why all three
were previously rejected individually) — but together they land all 7
verified ground-truth dwellings toward truth (none regress) and every built
form near zero. Cohort 62.1% -> 83.3% within-0.5, MAE 0.507 -> 0.377.
Guardrails: gov-API RdSAP corpus unchanged (78.9%, these are from_site_notes-
only helpers). pashub harness 58.5% -> 79.5% / MAE 0.520 -> 0.389; ratchets
tightened 0.58->0.78 and 0.521->0.40. pyright zero-new (mapper baseline 39).
New focused tests in TestFromSiteNotesInfiltrationFixes cover all three
fields incl. area-weighting and the built-form shelter map; goldens updated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 Table 3 ("For heat networks apply the formula above with p = 1.0
and h = 3 for all months") and §4.3's "insulated pipework" literal both
scope on the DHW source, so a water-only network gets the same row as a
network space main. Was falling back to the RdSAP §3 age-band default —
band E → p=0, h=5 — billing 64.58 kWh in January against the spec's 23.26.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 §4.3 (p.24) scopes itself to "where hot water is provided by a
heat network" and requires the Table 3 primary loss, so the gate keys on
the DHW source. Checked off the WHC before the main-keyed branches so a
non-boiler space main (cert 9093's warm air) can't zero it out.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 §4.3 (p.24) puts the water-heating efficiency in the Table 12
heat price, and C4 (p.53) scopes the plant efficiency to CO2/PE only, so
worksheet (310) = (64) × (305a) × (306) carries no efficiency term. The
dwelling-side divisor was applying it a second time.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
