Heat pump drags category 4 + electricity (29). Meter stays single-rate: a heat
pump does not imply an off-peak tariff the way storage/CPSU do (SAP §12 Rule 3
is conditional), so forcing Dual would mis-bill it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PV-array (ea7f4f43) and electricity-tariff (6ec09892) mapper fixes shifted
the observed output of five frozen gates that weren't updated alongside:
- has_pv component-accuracy floor 0.9798 -> 0.9697: carrying full-SAP lodged PV
now reads the true has_pv=True for full-SAP PV dwellings, so the leave-one-out
scorer's actual changes (ground-truth-method shift, ADR-0037 pattern).
- uprn_10093116528 80->... pin 82 -> 83: tariff=1 (standard) was wrongly read as
dual/Economy 7; translating to "single" re-prices the gas semi's electricity.
- uprn_10096028301 82 -> 84, uprn_10023444324 80 -> 82 (== lodged 82),
uprn_10023444320 81 -> 83: now credit the lodged sap_energy_source.pv_arrays
the schema previously dropped. Comments document the per-cert PV/Elmhurst
relationship (incl. the mid-floor sibling landing +2 over its lodged integer).
Pre-existing, unrelated failures untouched: the missing
sap_16_0_full_no_floor_dims.json fixture and the RdSAP-21 floor-area test (both
reproduce on origin/main).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Electric room heaters (691) get a Dual meter from the overlay (not single-rate):
an all-electric room-heater dwelling realistically bills on Economy 7, and the
§12 dispatch then applies a high/low split rather than a single-rate over-penalty.
Overlay owns its assumed-meter policy via _ASSUMED_DUAL_METER_CODES (the §12
off-peak systems + room heaters), keeping OFF_PEAK_IMPLYING_HEATING_CODES pure.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Appendix N3.7 water-heating 100% floor drops corpus MAE 0.726 -> 0.721
and lifts within-0.5 74.1% -> 74.2% on the 1000-cert RdSAP-21.0.1 sample
(cert 100110101713 moves inside +-0.5). Tighten the MAE ceiling to 0.722 and
the within-0.5 floor to 0.742, and log the slice.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 Appendix N3.7 ("Thermal efficiency for water heating - heat pumps",
PDF p.109): "multiply the thermal efficiency for water heating by the in-use
factor in Table N8; subject to a minimum efficiency of 100%." Our
_heat_pump_apm_efficiencies applies the in-use factor but omits the floor.
Anchored to golden fixture case 56 (PCDB 100061, cert 100110101713): an
oversized HP (PSR 3.107) extends water,3 198.9% -> 128.55%, x 0.60 in-use =
77.13% < 100% -> the accredited Elmhurst worksheet (216) reads 100.0000, we
read 77.13%. In-range PSR keeps 0.60 x 198.9 = 119.34% (above the floor).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The heat-pump PSR-extension fix (SAP 10.2 Appendix N2) drops corpus MAE from
0.740 to 0.726 on the 1000-cert RdSAP-21.0.1 sample; within-0.5 holds at
74.1%. Tighten the ceiling and log the slice.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 Appendix N2 (PDF p.101, footnote 44/45): for an air/ground/water
source heat pump whose plant size ratio exceeds the record's largest PSR,
the efficiency is reciprocal-interpolated between the largest-PSR value and
100% at twice the largest PSR (100% beyond that); below the smallest PSR the
efficiency is 100%. Our interpolator instead clamps to the top/bottom row.
Anchored to the accredited Elmhurst worksheet for cert 100110101713 (golden
fixture case 56, PCDB 100061): PSR 3.10665 over the record's largest 2.0
gives eta_space,1 = 147.011 -> (206) = 0.95 x 147.011 = 139.660, vs the
clamped 352.0 -> 334.4% that over-rates the dwelling by +18 SAP.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
within-0.5 floor 0.73->0.74 (now 0.741), MAE ceiling 0.762->0.740 (now
0.7397) on the fixed RdSAP-21.0.1 corpus. Log entry appended.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Gate PV generation/credit in cert_to_inputs on gov-API pv_connection:
credit only when ==2 ('connected'); ==1 ('present but not connected to the
dwelling's meter') contributes zero to the dwelling's cost/CO2/PE per
RdSAP 10 §11.1 / SAP 10.2 Appendix M. Non-int (None / site-notes str) keeps
the credit-if-array behaviour, so the Elmhurst/Summary + synthetic paths are
unchanged (no regression).
Corpus: all 5 pv_connection=1 PV certs move inside ±0.5 (e.g. 100051118081
+6.5→+0.5); MAE 0.760→0.740, within-0.5 73.8→74.3%, no regression
(pv_connection=2 certs keep their credit).
Also corrects a now-load-bearing latent bug: the solar-recommendation
overlay tagged recommended arrays pv_connection=1 ('not connected') — which
the new gate would zero. A new install connects to the dwelling's meter, so
it must be 2; pinned by the overlay test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RdSAP 10 §11.1 / SAP 10.2 Appendix M: PV is included in a dwelling's
assessment only if connected to the dwelling's own electricity meter. The
gov-API pv_connection enum encodes this — 0=no PV, 1=present-but-not-
connected, 2=connected. Corpus-validated (57 PV certs: pv_connection=1 MAE
4.48->1.22 without credit, 0/5 need it; pv_connection=2 needs it, MAE 0.98
vs 10.29) and Elmhurst-proven (connected SAP 87 vs not-connected 74).
cert_to_inputs currently credits a pv_connection=1 array; the test pins that
it must contribute zero generation. Adds pv_connection to make_minimal_sap10_epc.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
_is_elmhurst_roof_window mis-routes a vertical window (Location "External
wall") to sap_roof_windows when the building part's roof is a PARTY ceiling
(A "Another dwelling above" / NR "Non-residential space above"). A party
ceiling has no external roof, so it cannot host a rooflight.
Surfaced by simulated case 53 (cert 000565 re-keyed as a mid-floor electric-
storage flat, roof "A Another dwelling above"): its External-wall window
(U 2.00) routed to sap_roof_windows -> window area not deducted from the wall
(wall over-counted ~7 W/K) + priced as a roof window -> our SAP 74.0 vs
Elmhurst worksheet 75. Elmhurst lodges it Type "Window", Location "External
wall".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A gov-API flat can lodge dwelling_type="Mid-floor flat" while carrying its
own exposed roof — a top-floor flat mislabelled mid-floor. _dwelling_exposure
keyed roof exposure on the dwelling_type label alone, dropping the roof
heat-loss term: space-heating demand under-read ~32%, SAP over-read +7.
Fix: when the main building part lodges a *determined* roof_insulation_location
(an RdSAP integer code, not the "ND" Not-Defined party-ceiling sentinel),
expose the roof regardless of a contradictory label. Structured field, not a
description string and not roof_construction (which the gov-API lodges
building-wide on every unit, so it is not a per-unit signal).
On the RdSAP-21.0.1 corpus roof_insulation_location separates the classes with
zero disagreement: all 190 party-ceiling flats lodge "ND"; the 4 mid/ground
flats this exposes all move toward lodged, 0 away. within-0.5 73.3% -> 73.6%,
MAE 0.774 -> 0.761 (ratchets tightened). Verified end-to-end on the same
block: 715363 (location 6, RHI 2694) 81 -> 74 = lodged; genuine mid-floor
sibling 715395 (location ND, RHI 1024) stays party at 83 = lodged.
The override is additive (only ever exposes a label-dropped roof) and reads
the main part, so multi-part flats with a party main ceiling stay party.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A gov-API cert can lodge dwelling_type="Mid-floor flat" while carrying a
real exposed roof element (roof_construction != 7 "dwelling above") over a
"(another dwelling below)" floor — i.e. a top-floor flat mislabelled
mid-floor. Property 715363 (uprn 6027561) + sibling 715395 (6027563) do
exactly this; the correctly-labelled top-floor sibling 715871 (6027574),
same block + same flat roof, already computes the lodged SAP 74.
_dwelling_exposure keys roof exposure on the dwelling_type label alone, so
it drops the roof heat-loss term, under-reading space-heating demand ~32%
(calc 1833 vs lodged RHI 2694) and over-reading SAP +7 (81 vs 74).
Pins the fix: a mid-floor label + lodged exposed roof must expose the roof
(floor stays party). Also corrects the existing mid-floor fixture to lodge
the party-ceiling code 7 (the default 4 is an exposed pitched roof).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pin the hit-list properties: each property's real Landlord Override set still
resolves to overlays and trips physical_state_changed, and the rebaseliner
adopts the calculator output (reason physical_state_changed/both) rather than
echoing the lodged headline — so the displayed baseline and the modelled plan
agree. Scores a real cert through the live Sap10Calculator.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add Property.physical_state_changed (true on Site Notes / Landlord Overrides
/ Prediction — trigger (b)/(c)) and pass it from the
PropertyBaselineOrchestrator into the Rebaseliner. So an overridden or
predicted SAP>=10.2 property now stores calc(effective) as its Effective
baseline instead of echoing the lodged headline — closing the "81 in the DB"
divergence between the displayed baseline and the modelled plan.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A SAP>=10.2 cert whose physical state was changed by Landlord Overrides or
Prediction must rebaseline off the calculator (the accredited lodged figure
no longer describes the dwelling) and tag physical_state_changed / both, and
must NOT log divergence (the calc IS adopted, nothing to validate against).
This is the D1 fix: the stored Effective baseline stops echoing the lodged
headline for overridden properties.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The deterministic calculator reads sap_ventilation.extract_fans_count (which
already round-trips); the top-level epc.extract_fans_count is its mirror (the
mapper sets both from one source). Reconstruct it from the same column so
EpcPropertyData round-trips complete, dropping the allow-list exception.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
community heating fuel + CHP fraction, alt-wall is_sheltered, wall
insulation thermal conductivity, pv_diverter_present, measured cylinder
volume, AP50 air permeability — all calculator-read, all silently dropped on
save. FE columns now live; assert deep-equal round-trip and drop their
coverage-guard allow-list entries so the guard enforces reconstruction.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
