A typical mains-gas combi house re-lodged as an air-source heat pump closes at
1e-4 (gas-boiler 1 example from the technical specialist). Closes one named gap
the pin surfaced: a whole-system replacement to a PCDB-indexed system left the
old Table 4a sap_main_heating_code (104) beside the new heat-pump index, and the
stale code won the calculator's efficiency dispatch (hot water billed at boiler
not HP efficiency, ΔSAP 3.98). _fold_heating now enforces the mutual exclusion
of the two efficiency anchors (setting an index clears the SAP code and vice
versa). Also fixed a pre-existing pyright annotation in the lighting applicator
test. ADR-0024.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The same absolute-target HHR overlay reproduces the common relodged after from
two different base systems (existing electric storage; "no system present"
electric) — proving the bundle is a true whole-system end-state. Closes one
named gap the pin surfaced: the relodged HHR cylinder lodges
cylinder_thermostat='Y', so HeatingOverlay + _fold_heating + the HHRSH overlay
gain cylinder_thermostat (ΔSAP 0.065 -> <1e-4). ADR-0024.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The 5th EpcSimulation overlay surface and the deepest applicator fold yet: a
heating bundle is a whole-system replacement, so _fold_heating routes its
absolute-target fields across main_heating_details[0] (fuel/emitter/control +
sap_main_heating_code OR index+category), sap_heating (water_heating_* +
cylinder), the top-level EpcPropertyData (has_hot_water_cylinder), and
sap_energy_source (meter_type, mains_gas). ADR-0024.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Slice 1 of the lighting generator (ADR-0023): the first whole-dwelling,
top-level overlay surface. LightingOverlay carries the four fixed-lighting
bulb-count fields by their exact EPC names (all Optional, absolute counts) +
EpcSimulation.lighting. The applicator's _fold_lighting writes the non-None
counts directly onto the result EpcPropertyData by name (setattr) — simpler
than ventilation's nested fold since the counts live top-level. Baseline
unmutated; pyright strict clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Slice 1 of the glazing generator (ADR-0022). `WindowOverlay` (all-optional
partial of one SapWindow) + `EpcSimulation.windows` keyed by sap_windows index.
The applicator folds it onto sap_windows[i]: glazing_type flat on the window,
u_value/solar_transmittance routed into its WindowTransmissionDetails (created
if absent) — the applicator's first nested write, because that's where the
calculator reads window heat loss and solar gain. Baseline left unmutated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
domain/modelling/ had grown to 15 flat modules. Group the behavioural ones into
subpackages — generators/ (wall/roof/floor Recommendation Generators), scoring/
(overlay applicator, package scorer, role-1/3 scoring), optimisation/ (optimiser
+ measure dependency) — and leave the shared value-object vocabulary
(recommendation, plan, scenario, product, contingencies, simulation) flat at the
top, since it is imported everywhere. Pure move + import-path rewrite across 89
import sites; no behaviour change. 136 pass, pyright strict clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 13:48:36 +00:00
Renamed from domain/modelling/overlay_applicator.py (Browse further)
