mirror of
https://github.com/Hestia-Homes/Model.git
synced 2026-06-08 11:17:27 +00:00
482ce88b55
SAP 10.2 Table 5a (PDF p.177) row "Warm air heating system fans
a) c)" computes the gain as SFP × 0.04 × V (W). Footnote c) sets
the default SFP to 1.5 W/(l/s) when no PCDB warm-air-unit record
is lodged; footnote a) applies the heating-season-only mask
(zero in summer months). Footnote c) further omits the gain when
the dwelling has balanced whole-house mechanical ventilation
(MVHR / MV) — same omission as the Table 4f kWh-side footnote e).
Pre-slice the cascade's `internal_gains_from_cert` only wired the
central-heating-pump row of Table 5a; the warm-air-fan gain helper
(`warm_air_heating_fan_w`) existed but was unwired. The kWh-side
parallel (Table 4f, 136.35 kWh/yr) was wired in S0380.158 — this
slice closes the symmetry on the gain side.
Per-line walk on electric 2 (SAP code 524 = Cat 5 ASHP with
warm-air distribution, V = 227.25 m³, no balanced MV):
worksheet (70)[Jan] = 13.6350 W
cascade (70)[Jan] = 0.0000 W delta = -13.635 W
worksheet (98c)[Jan] = 1600.43 kWh
cascade (98c)[Jan] = 1608.12 kWh delta = +7.69 kWh
13.635 W = 1.5 × 0.04 × 227.25 exactly. The -13.6 W winter gain
shortfall propagates through the §7 utilisation cascade and over-
states cascade SH demand by ~57 kWh/yr (cascade 9483 vs worksheet
9426), under-charging cost by ~£2.50 with opposite sign to the
S0380.156-.158 closures.
Fix: new `_any_main_system_has_warm_air_distribution(epc)` +
`_has_balanced_mechanical_ventilation(epc)` predicates in
`internal_gains.py`, mirroring `cert_to_inputs._TABLE_4A_WARM_AIR_SAP_CODES`
+ `_BALANCED_MV_KIND_NAMES` (kept here as siblings so the worksheet
layer stays free of rdsap deps). Orchestrator wires
`warm_air_heating_fan_w(sfp=1.5, dwelling_volume_m3)` into the
heating-season term of `pumps_fans_monthly_w` when warm-air
distribution is present and balanced MV is not.
Closures electric 2:
ΔSAP_c -0.1087 → -0.0000 EXACT
Δcost +£2.50 → -£0.00 EXACT
ΔCO2 +16.54 → +11.95 (joins lighting-PE deferred cohort)
ΔPE +97.69 → +48.66 (joins lighting-PE deferred cohort)
Electric 2 joins the 15-variant lighting-PE deferred cohort
(electric 1 + electric 3/5/6/7/8/9 + solid fuel 5/6/7/8 + solid
fuel 4/9/10/11 + electric 2) where SAP/cost are EXACT but PE/CO2
carry an Elmhurst-vs-spec MONTHLY-factor offset (cohort uses
Table 12 annual factors on the off-peak HW immersion line; spec
mandates Table 12d/12e monthly per the header).
Verbatim spec quote (SAP 10.2 Table 5a row "Warm air heating
system fans a) c)", PDF p.177):
"Warm air heating system fans a) c) SFP × 0.04 × V"
Footnote c): "SFP is the specific fan power from the database
record for the warm air unit if applicable; otherwise
1.5 W/(l/s). These values of SFP include an in-use factor.
If the heating system is a warm air unit and there is balanced
whole house mechanical ventilation, the gains for the warm air
system should not be included."
Footnote a): "... Set to zero in summer months. ..."
Σ |ΔSAP_c| across 25-variant cohort: 0.18 → 0.07 (~60% reduction).
No regressions on the other 24 variants or any golden fixture —
gate keyed on Table 4a warm-air SAP code frozenset (only electric
2 in the corpus has a code in that set).
Tests: 905 pass (+1), 0 fail. Pyright net-zero (35 → 35).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|---|---|---|
| .. | ||
| fixtures | ||
| __init__.py | ||
| test_elmhurst_end_to_end.py | ||
| test_elmhurst_extractor.py | ||
| test_end_to_end.py | ||
| test_extractor.py | ||
| test_heating_systems_corpus.py | ||
| test_pdf.py | ||
| test_summary_pdf_mapper_chain.py | ||