Model/domain/modelling/simulation.py

"""The Simulation Overlay (`EpcSimulation`) — the change a single Measure
Option makes to a Property's EpcPropertyData.

An all-optional partial mirror of EpcPropertyData / SapBuildingPart, covering
the retrofit-relevant surface only (wall fields first). It is *not* an
EpcPropertyData — composition, not inheritance — and carries no scores.
Building parts are targeted by `BuildingPartIdentifier` so a measure addresses
the exact `SapBuildingPart` (the main wall vs an extension). See CONTEXT.md.
"""

from dataclasses import dataclass, field
from typing import List, Mapping, Optional, Union

from datatypes.epc.domain.epc_property_data import (
    BuildingPartIdentifier,
    PhotovoltaicArray,
    PvBatteries,
)


@dataclass(frozen=True)
class BuildingPartOverlay:
    """All-optional partial of `SapBuildingPart` (wall surface first).

    A `None` field means "leave the baseline value unchanged".
    """

    wall_insulation_type: Optional[int] = None
    # Added solid-wall insulation depth (mm) — drives the calculator's Table 6
    # bucket / §5.8 documentary U-value for EWI (`wall_insulation_type=1`) and
    # IWI (`wall_insulation_type=3`); λ defaults to 0.04 W/m·K in the calculator.
    wall_insulation_thickness: Optional[int] = None
    roof_insulation_thickness: Optional[int] = None
    floor_insulation_thickness: Optional[int] = None
    floor_insulation_type_str: Optional[str] = None


@dataclass(frozen=True)
class VentilationOverlay:
    """All-optional partial of `SapVentilation` — the whole-dwelling ventilation
    change a Measure Option makes (e.g. retrofit MEV). Unlike a
    `BuildingPartOverlay` this targets no building part; it folds onto the
    dwelling's single `sap_ventilation`.

    `mechanical_ventilation_kind` names the SAP10.2 §2 mechanical-ventilation
    kind (the `MechanicalVentilationKind` enum name, e.g.
    ``"EXTRACT_OR_PIV_OUTSIDE"`` for decentralised MEV). A `None` field means
    "leave the baseline value unchanged".
    """

    mechanical_ventilation_kind: Optional[str] = None


@dataclass(frozen=True)
class WindowOverlay:
    """All-optional partial of one `SapWindow` — the change a glazing Measure
    makes to a single window (ADR-0022).

    `glazing_type` is the SAP10.2 Table U2 code (drives only the §5 daylight
    factor when a per-window U is lodged). `u_value` and `solar_transmittance`
    are written into the window's `WindowTransmissionDetails` — where the
    calculator reads heat loss and solar gain from — because our calculator
    consumes the lodged values directly rather than deriving them from
    `glazing_type`. A `None` field means "leave the baseline value unchanged".
    """

    glazing_type: Optional[int] = None
    u_value: Optional[float] = None
    solar_transmittance: Optional[float] = None


@dataclass(frozen=True)
class LightingOverlay:
    """All-optional partial of the dwelling's fixed-lighting bulb counts — the
    whole-dwelling lighting change a Measure Option makes (e.g. an all-LED
    upgrade — ADR-0023). Unlike a `BuildingPartOverlay` or `WindowOverlay` this
    targets no building part or window; its fields are the four **top-level**
    `EpcPropertyData` bulb counts, folded directly by name.

    The counts are absolute target states, not deltas (an all-LED upgrade sets
    ``led = total``, the rest 0). A `None` field means "leave the baseline value
    unchanged".
    """

    led_fixed_lighting_bulbs_count: Optional[int] = None
    cfl_fixed_lighting_bulbs_count: Optional[int] = None
    incandescent_fixed_lighting_bulbs_count: Optional[int] = None
    low_energy_fixed_lighting_bulbs_count: Optional[int] = None


@dataclass(frozen=True)
class HeatingOverlay:
    """All-optional partial of a dwelling's whole heating + hot-water system —
    the change a heating Measure Option makes (e.g. a high-heat-retention
    storage or ASHP bundle — ADR-0024). The deepest overlay surface: a heating
    bundle is a whole-system replacement, so its fields target **five**
    locations, and `_fold_heating` routes each to its home:

    - ``main_heating_details[0]`` (the primary system) — fuel, heat emitter,
      control, and the efficiency anchor (`sap_main_heating_code` for table-
      resolved systems like storage heaters, or `main_heating_index_number` +
      `main_heating_category` for PCDB-resolved systems like heat pumps);
    - ``sap_heating`` (top-level) — the implied hot-water arrangement
      (`water_heating_*`, cylinder size + insulation);
    - the top-level `EpcPropertyData` — `has_hot_water_cylinder`;
    - ``sap_energy_source`` — `meter_type` (an off-peak tariff for storage) and
      `mains_gas` (cleared when the dwelling goes all-electric).

    The values are **absolute target states**, not deltas (the bundle replaces
    the system regardless of the before). A `None` field means "leave the
    baseline value unchanged".
    """

    # main_heating_details[0]
    main_fuel_type: Optional[Union[int, str]] = None
    heat_emitter_type: Optional[Union[int, str]] = None
    main_heating_control: Optional[Union[int, str]] = None
    sap_main_heating_code: Optional[int] = None
    main_heating_index_number: Optional[int] = None
    main_heating_category: Optional[int] = None
    # A modern condensing boiler has a fanned (room-sealed) flue; the boiler
    # upgrade sets this True (SAP 10.2 Table 4f flue-fan electricity + the
    # Table 4b condensing-boiler seasonal-efficiency basis depend on it).
    fan_flue_present: Optional[bool] = None
    # The boiler's flue type (Elmhurst enum) — a new condensing boiler lodges
    # type 2 (room-sealed/balanced). SAP-inert, but written for fidelity so the
    # end-state matches the installed boiler.
    boiler_flue_type: Optional[int] = None
    # sap_heating (top-level)
    water_heating_code: Optional[int] = None
    water_heating_fuel: Optional[int] = None
    cylinder_size: Optional[Union[int, str]] = None
    cylinder_insulation_type: Optional[Union[int, str]] = None
    cylinder_insulation_thickness_mm: Optional[int] = None
    cylinder_thermostat: Optional[str] = None
    # EpcPropertyData (top-level)
    has_hot_water_cylinder: Optional[bool] = None
    # sap_energy_source
    meter_type: Optional[str] = None
    mains_gas: Optional[bool] = None


@dataclass(frozen=True)
class SecondaryHeatingOverlay:
    """The change the Secondary Heating Removal Measure makes (ADR-0028): strip
    the dwelling's lodged secondary heating system so the main serves 100% of
    space heating. Unlike every other overlay — which writes a *target state*
    and treats ``None`` as "leave unchanged" — this overlay *clears* the
    secondary fields (`secondary_heating_type`, `secondary_fuel_type`) to
    absent. Its presence on an `EpcSimulation` is the signal; `remove` carries
    the intent explicitly.

    On an electric-storage main RdSAP §A.2.2 forces a default secondary back, so
    removal is a no-op there — the Optimiser de-selects those (it owns the
    economics); eligibility still offers them.
    """

    remove: bool = True


@dataclass(frozen=True)
class SolarOverlay:
    """All-optional partial of the dwelling's PV-bearing energy source — the
    whole-dwelling change a Solar PV Measure Option makes (ADR-0026). Like the
    ventilation/lighting overlays it targets no building part; `_fold_solar`
    writes its fields onto `sap_energy_source`, the home of the SAP Appendix M
    PV inputs.

    The values are **absolute target states**, not deltas:

    - ``photovoltaic_arrays`` is the *installed potential* — one
      `PhotovoltaicArray` per non-north roof segment — and **replaces** the
      dwelling's existing `photovoltaic_arrays` (empty for a non-PV dwelling),
      never the EPC's own existing PV;
    - ``pv_diverter_present`` routes surplus PV to a hot-water cylinder
      immersion (App G4); set only when the dwelling has a cylinder to divert
      to (a combi has none);
    - ``is_dwelling_export_capable`` is set ``True`` absolutely — an export
      meter is ensured post-install, driving the SEG export credit regardless
      of the before;
    - ``pv_batteries`` carries the battery variant's storage.

    A `None` field means "leave the baseline value unchanged".
    """

    photovoltaic_arrays: Optional[List[PhotovoltaicArray]] = None
    pv_diverter_present: Optional[bool] = None
    pv_connection: Optional[Union[int, str]] = None
    is_dwelling_export_capable: Optional[bool] = None
    pv_batteries: Optional[PvBatteries] = None


def _no_building_parts() -> dict[BuildingPartIdentifier, BuildingPartOverlay]:
    return {}


def _no_windows() -> dict[int, WindowOverlay]:
    return {}


@dataclass(frozen=True)
class EpcSimulation:
    """A Simulation Overlay: the per-building-part changes a Measure Option
    makes, keyed by `BuildingPartIdentifier`; per-window changes keyed by the
    `sap_windows` index; plus an optional whole-dwelling `ventilation` change
    (the Measure Dependency surface — ADR-0016)."""

    building_parts: Mapping[BuildingPartIdentifier, BuildingPartOverlay] = field(
        default_factory=_no_building_parts
    )
    windows: Mapping[int, WindowOverlay] = field(default_factory=_no_windows)
    ventilation: Optional[VentilationOverlay] = None
    lighting: Optional[LightingOverlay] = None
    heating: Optional[HeatingOverlay] = None
    secondary_heating: Optional[SecondaryHeatingOverlay] = None
    solar: Optional[SolarOverlay] = None