mirror of
https://github.com/Hestia-Homes/Model.git
synced 2026-06-08 11:17:27 +00:00
ea4728c6f6
Closes the 5 community-heating variants in the heating-systems corpus
(community heating 1/2/3/4/6 on property 001431). Pre-slice the
mapper returned `MainHeatingDetail.main_fuel_type=''` for every
community-heating cert because §14.0 lodges no Fuel Type — only EES
'COM' + a Table 4a heat-network SAP code (301/302/304). The cascade
strict-raised `MissingMainFuelType` per S0380.132. The actual fuel
that bills the cascade lives in the §14.1 Community Heating/Heat
Network block, which the extractor was skipping entirely.
SAP 10.2 Table 12 (PDF p.189) defines the heat-network fuel codes:
Boilers + Mains Gas → 51 (heat from boilers — mains gas)
Boilers + Mineral oil → 53 (heat from boilers — oil)
Boilers + Coal → 54 (heat from boilers — coal)
Boilers + Biomass → 43 (heat from boilers — biomass)
Combined Heat and Power → 48 (heat from CHP; fuel-agnostic)
Heat pump + Electricity → 41 (heat from electric heat pump)
Per spec text the upstream fuel determines the boiler-side code; CHP
is fuel-agnostic at the Table 12 cost / CO2 / PE level.
Three layers wired:
1. Survey schema — new `CommunityHeating` dataclass alongside
`MainHeating2` carrying the §14.1 fields (heating_type,
community_heat_source, community_fuel_type, heating_controls_ees,
heating_controls_sap, chp_fuel_factor). Mutually exclusive with
`main_heating_2` at the §14.1 level. Attached as
`MainHeating.community_heating: Optional[CommunityHeating] = None`.
2. Extractor — new `_extract_community_heating()` method bracketed by
"14.1 Community Heating/Heat Network" / "14.2 Meters". Returns
None on individually-heated dwellings (no Community Heat Source
lodged). Wired into `_extract_main_heating()`.
3. Mapper — new `_resolve_community_heating_fuel_code(heat_source,
fuel)` dispatch helper + `_ELMHURST_COMMUNITY_BOILER_FUEL_TO_TABLE_12`
constant for the boiler upstream-fuel split. Wired in
`_map_elmhurst_sap_heating` after the EES-code-to-fuel dispatch
and before the strict-raise on absent SAP code.
Per the standard slice workflow + [[feedback-aaa-test-convention]]:
- 5 new AAA tests in `test_community_heating_mapper_resolves_table_12_
fuel_code` parametrized over the 5 corpus variants, asserting the
mapper resolves the expected Table 12 code per variant.
- The existing parametrized residual-pin test in
`test_heating_systems_corpus_residual_matches_pin` picks up the
5 community-heating variants with cascade-side residuals pinned as
forcing functions for follow-up slices:
variant dSAP dcost dCO2 dPE
CH1 (Boilers/Gas) +0.59 -£14 -787 -3827
CH2 (CHP/Gas) +4.50 -£104 -1430 +1506
CH3 (HP/Elec) +0.59 -£14 +1614 +11879
CH4 (CHP/Oil) +4.50 -£104 -4397 +495
CH6 (CHP/Coal) -3.52 +£81 -2935 +7865
These reflect open cascade-side work (SAP 10.2 Appendix C CHP/
boiler heat-fraction split missing — cascade treats CHP+Boilers as
100% CHP; community-HP COP cascade missing — cascade doesn't divide
delivered heat by COP for Table 12 code 41; heat-network overall
CO2/PE blended-factor cascade missing — cascade doesn't compute
worksheet rows (386)/(486)). Pinned per [[feedback-zero-error-strict]];
follow-up slices close gaps and re-pin smaller residuals.
- `_BLOCKED_BY_MISSING_MAIN_FUEL_TYPE` tuple now empty; the
blocked-tier test pytest-skipped via `pytest.mark.skipif` with a
reason naming this slice.
Test baseline at HEAD: 921 pass + 1 skipped (was 916 + 0 at
predecessor
|
||
|---|---|---|
| .. | ||
| fixtures | ||
| __init__.py | ||
| test_elmhurst_end_to_end.py | ||
| test_elmhurst_extractor.py | ||
| test_end_to_end.py | ||
| test_extractor.py | ||
| test_heating_systems_corpus.py | ||
| test_pdf.py | ||
| test_summary_pdf_mapper_chain.py | ||