A hot-water cylinder lodging gov-API `cylinder_size=0` ("size not
determined", with has_hot_water_cylinder=true) resolved to a None volume
in `_cylinder_storage_loss_override` (which reads `_cylinder_volume_l_
from_code`, returning None for code 0). The subsequent `if volume_l is
None: return None` then DROPPED the cylinder's Table-2 storage loss
entirely — under-costing the DHW and over-rating the dwelling. Meanwhile
the Table-13 high-rate-fraction path already used `_hot_water_cylinder_
volume_l` (which defaults size 0 to 110 L), so the two DHW paths
disagreed on the same cylinder.
RdSAP 10 §10.5 Table 28 ("if the actual size is not determined, the size
is taken as according to Table 28") makes an unsized present cylinder the
110 L "Normal" baseline, which STILL incurs the storage loss. Fixed by
defaulting the storage-loss volume to 110 L for the explicit size-0 case.
Gated on the EXPLICIT 0 (not None): a full-SAP cert whose RdSAP
cylinder_size is simply unlodged (None, e.g. pinned 10091568921) keeps
its own cylinder handling rather than a forced 110 L RdSAP default.
7 corpus certs lodge cylinder_size=0 + has_cylinder=true. Gauge: within
77.0% -> 77.3%, SAP MAE ~flat (0.648), CO2 0.074 -> 0.073, PE 3.2 -> 3.05
(the previously-dropped storage loss now correctly counted in the demand
cascade). Unit-pinned in test_cert_to_inputs (storage loss non-None for
size 0); RealCertExpectation 200004017091 = 71.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Built the cert in accredited Elmhurst RdSAP10-Online on the lodged register
inputs; downloaded Input Summary + SAP Worksheets (committed alongside).
Confirmed:
- Slice 5 DIRECTION validated: the externally-insulated solid-brick wall is
billed insulated by both tools (Elmhurst U 0.48, engine U 0.29), far below
the uninsulated 1.40 the pre-fix §5.8 gate produced.
- ROOF matches EXACTLY (U 0.30, 9.35 W/K).
- Engine 71.74 = lodged 71; Elmhurst current SAP 66 (its "unknown external
insulation" default is more conservative + this build used a generic combi
and no keyed wall thickness, so 66 is not a clean engine-comparison).
Follow-up lead (documented in ELMHURST_FINDINGS.md): the engine feeds the
UNMEASURED lodged wall_thickness (360 mm, measured=N) into the §5.6 formula,
whereas RdSAP §5.3 uses measured thickness / Table-3 default otherwise. The
party-wall "difference" is NOT a bug (engine 0.25 is spec-correct, Table 15
row 4). Also adds the build script scripts/hyde/build_200004296092.py.
No engine change in this commit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A SOLID-BRICK or STONE wall lodging External/Internal insulation
(wall_insulation_type 1/3) but no measured insulation thickness (gov-API
"NI" -> None) was billed at its UNINSULATED §5.6/Table-6 U-value: the §5.8
added-insulation R-value adjustment gates on `insulation_thickness_mm > 0`,
so an unknown thickness fell straight through to the raw solid-wall U
(~1.4-1.7). This over-counted wall heat loss and under-rated the dwelling.
RdSAP 10 §5.4 (PDF p.32): "the U-value with additional insulation is based
on the thickness of insulation of mineral wool type (assume 100 mm if
thickness is unknown)". Apply that 100 mm default so the §5.8 Table-14
R-value fires. Scoped to solid brick / stone (the only constructions with
a §5.8 R-value path in u_wall) so cavity (composite path) and timber /
system-built walls are untouched.
Localised by deep-diving corpus cert 200004296092 (end-terrace, solid
brick 360 mm "with external insulation", NI): walls 101.7 W/K (U~1.40,
HLP 3.46 = absurd for an insulated wall) -> ~0.29; PE +59.6 -> ~0; engine
64.35 (Δ -6.65) -> 71.74 = lodged 71. ~8 solid-brick/stone corpus certs
carry this NI-thickness-with-insulation shape.
Gauge: within-0.5 held at 77.0%, SAP MAE 0.658 -> 0.647, CO2 0.074 ->
0.073, PE 3.2 -> 3.1 (floor ratcheted). Unit-pinned in test_rdsap_uvalues
(brick 360 mm external NI -> 0.29) + RealCertExpectation 200004296092 = 72.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An instantaneous point-of-use electric water heater (WHC 907/909, no
cylinder) on an off-peak tariff was billed 100% at the off-peak LOW rate
by the generic electric-off-peak else-branch. But SAP 10.2 §12 (PDF line
2680) computes the off-peak on-peak HW proportion via Table 13, "dependent
on the total floor area and the CYLINDER size" — it presumes a stored-water
cylinder charged overnight. An instantaneous heater has NO cylinder, heats
on demand, and cannot shift to the off-peak window, so 100% of its
consumption bills at the HIGH rate (Table 12a WH high-rate fraction 1.0).
Both the SAP-cost rate (`_hot_water_fuel_cost_gbp_per_kwh`) and the
ADR-0014 / CO2-PE fraction (`_hot_water_high_rate_fraction`) fixed
consistently (low-rate scalar -> 7-hour high rate; fraction 0.0 -> 1.0).
Localised by deep-diving corpus cert 74061136 (HHR-storage mid-floor flat,
WHC 909): PE matched lodged (+1.6, roof+floor zero-loss) while SAP over-rated
+7.72 — the cost-only signature. Its DHW was ours £59 vs lodged £344 (5.8x);
the tariff was the whole gap. Fix: +7.72 -> -1.25 (residual is separate small
fabric). 7 corpus certs carry electric-instantaneous DHW on off-peak; the 3
outside 0.5 all move sharply inward (MAE the win, not within-0.5 crossings).
RdSAP 10 §12 tariff routing confirmed spec-correct (Unknown meter + storage
409 -> off-peak 7-hour, Rule 2) — the bug was the DHW rate, not the tariff.
Unit-pinned in test_cert_to_inputs; RealCertExpectation 74061136 = 72.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The gov-API `secondary_fuel_type` enums 5 (anthracite) / 9 (dual fuel) /
33 (coal) collide in VALUE with same-valued RdSAP-10 Table-32 codes for
OTHER fuels (5=bulk LPG, 9=LPG SC11F, 33=elec 10h-low). The main-fuel
boundary and the CO2/display `_secondary_fuel_cost_gbp_per_kwh` already
canonicalise these via `canonical_fuel_code`, but the SAP-DRIVING
`_fuel_cost` cascade had a SEPARATE inline secondary rate that passed the
raw enum straight to the price lookup — so the two paths diverged and the
cost path silently mis-priced.
Anthracite (enum 5) was billed at the bulk-LPG code-5 rate 12.19 p/kWh
instead of 3.64 — a 3x over-cost on the secondary that under-rated every
solid-fuel-secondary dwelling. Worst: corpus cert 100050355518 (semi,
2 extensions, anthracite room-heater secondary) lodged 36 / engine 20.8
-> 35.5. Its CO2/PE already matched lodged (the demand cascade was right)
— a pure cost-side gap, which is what localised it.
Fix: canonicalise `secondary_fuel` before the Table-32 lookup in
`_fuel_cost`, mirroring the main-fuel boundary. 55 corpus certs carry a
colliding secondary.
Gauge: within-0.5 75.5% -> 77.0%, SAP MAE 0.708 -> 0.668 (floors
ratcheted). The prior enum-9 test only guarded the display helper; new
test_fuel_cost_secondary_colliding_fuel_priced_at_canonical_rate pins the
_fuel_cost cost path directly. RealCertExpectation pinned for
100050355518 (36 = lodged).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RdSAP 10 §5.11.4: a pitched roof lodging thickness "NI" with description
"...insulated (assumed)" was billed at the §5.11.4 observed-retrofit
50 mm row (U 0.68) while the SAME description lodged with "ND" fell
through to the Table 18 age-band default (0.40 for bands A-G). The
ND-vs-NI sentinel is lodging-software noise; "(assumed)" means the
insulation PRESENCE is an age-band assumption, not an observed
retrofit, so Table 18's "thickness cannot be determined" clause
governs both forms. The bare "insulated" description (observed
retrofit, no qualifier) keeps the 50 mm row.
Evidence: the 27-cert loc4+NI corpus cohort was systematically
under-rated (~-1 SAP; zero positive movers among "(assumed)" certs),
vs the 102-cert loc4+ND cohort already on Table 18 at ~0 bias.
Gauge: within-0.5 74.2% -> 75.5%, SAP MAE 0.721 -> 0.708, CO2 MAE
0.09 -> 0.074, PE MAE 3.5 -> 3.2 (floors ratcheted). Unit-pinned in
test_rdsap_uvalues (assumed -> Table 18; bare-insulated -> 0.68
regression guard); integration pin in test_heat_transmission updated;
RealCertExpectation pinned for 10094975827 (66 = lodged, was -1.87).
Ledger: C002 103001004 deferred pending Elmhurst arbitration
(single-immersion off-peak pricing + declared cylinder loss vs
Table-2); C006 quadruplet marked ⚠ (LIG-21.0 software honours lodged
0 extract fans literally vs the Elmhurst-validated 0=unknown->default
convention, worksheet case 46).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Setup for the RdSAP-21.0.1 corpus gauge campaign (74.2% within-0.5,
SAP MAE 0.721 at HEAD, 1000/1000 computed):
- scripts/corpus_1000/build_worklist.py — runs all 1000 corpus certs
through the gauge's own path (from_api_response -> Sap10Calculator),
ranks |engine - lodged| descending, clusters by dwelling signature,
and (re)writes scripts/corpus_1000/worklist.md preserving per-cert
statuses and notes. 258 certs outside 0.5 in 249 clusters.
- C001 (worst cert, Δ +23.9): uprn 4510053280, ground-floor flat 47 m²
on ASHP PCDB 100053 (Mitsubishi Ecodan 5 kW, PSR table 0.2-2.0).
Dwelling PSR 2.031 -> SAP 10.2 N2 footnotes 44/45 heat-pump extension
(reciprocal interpolation toward 100% at 2x largest PSR) = 305%
space efficiency, which accredited Elmhurst also applies (golden
case 56, record 100061). The LODGED software instead treated the
out-of-range record as invalid and billed 100% direct electric +
standard schedule (reproduces lodged CO2 to 1%). Lodged-software
methodology gap, worklist ⚠, engine untouched; observed engine 75
pinned in test_real_cert_sap_accuracy.
Gauge floors unchanged (no engine change).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Pins the engine's baseline SAP (54) for this electric-room-heater +
gas-multipoint end-terrace ground-floor maisonette (portfolio 814 pid
742121) against accredited Elmhurst RdSAP-10 (worksheet SAP 53, within
1 point), with the Elmhurst Input Summary + SAP Worksheet PDFs saved as
evidence alongside the cert's epc.json.
Companion to the HHRSH storage-heater off-peak-pricing fix PR: this
baseline pin confirms the calculator is faithful on the as-lodged
dwelling; that PR fixes the HHRSH recommendation overlay (engine 48->73
vs Elmhurst 71).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds the mapper-driven e2e cascade pin for "simulated case 50" (000565 semi,
electric storage main SAP 402 + portable electric secondary + MVHR + whc-903
DUAL electric immersion + 160 L cylinder, Economy-7). Routes the Summary PDF
through extractor + mapper + calculator like the other 000565 fixtures.
Locks in two off-peak fixes this case ground-truthed:
- the Table 13 HW high/low split applied to CO2/PE (commit 39ae2cf0), and
- the Table 12a Grid 2 MVHR fan fraction 0.71/0.58 (commit cd5113ab).
All 11 SAP-result fields reconcile to the U985 worksheet EXACTLY, including
the (272) rating CO2 2397.1237 — SAP 38.8426 (=39), cost £1317.0116, water
1668.0788 kWh, fans 315.6384 kWh.
Summary mirrored to the tracked fixtures dir so the test doesn't depend on
the unstaged `sap worksheets/` workspace.
pyright strict gate not run locally (pyright not installed in this container).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the mapper-driven e2e cascade pin for "simulated case 52" (000565
semi + regular non-combi mains-gas boiler SAP 102 + 160 L foam cylinder
heated from the main, no cylinder stat, uninsulated primary pipework,
standard tariff). Routes the Summary PDF through extractor + mapper +
calculator like the other 000565 / 001431_case* fixtures.
This closes the last untested branch of the cylinder/water chain: the
SAP 10.2 §4 cylinder storage loss (Table 2/2a/2b lines 51-55) + the
Table 3 PRIMARY circuit loss (59, uninsulated pipework + no stat) that
combi/immersion fixtures don't reach. All 11 SAP-result fields reconcile
to the U985 worksheet EXACTLY with no calculator change — SAP 57.2904
(=57), cost £911.1973, water 3929.7635 kWh — confirming the cylinder-loss
derivation is correct.
Summary mirrored to the tracked fixtures dir so the test doesn't depend
on the unstaged `sap worksheets/` workspace.
pyright strict gate not run locally (pyright not installed in this container).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Corpus validation of the modelling_e2e photovoltaic_supply-as-list fix. Cert
6102-6227-8000-0083-2292 (RdSAP-20.0.0 semi, gas combi + 2× 1.14 kW PV arrays)
crashed from_rdsap_schema_20_0_0 on the measured-array list; the fix routes it
through the dict-tolerant _map_schema_21_pv. PV correctly credited: engine 61
(no PV) → 66 (+5). Built in Elmhurst (evidence: epc.json + summary + worksheet,
fabric+heating; the PV "New Technologies" Panel-details grid deferred): worksheet
55 = engine-on-Elmhurst-inputs 55 exactly → calculator faithful. The +6 engine-vs-
Elmhurst base-dwelling residual is the documented RdSAP-default gap (band-C cavity-
uninsulated suspended-floor semi). Pinned engine 66.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Corpus validation of the modelling_e2e built_form fix. Cert 8742-6624-9300-2780-4926
(SAP-Schema-16.0, ground-floor electric-storage-heater flat) omits built_form; the
mapper now derives it from dwelling_type. built_form is ML-only so the fix is
SAP-neutral: engine 66 = lodged 66 exactly. Built in Elmhurst (evidence: epc.json +
summary + worksheet): worksheet 54, engine-on-Elmhurst-inputs 53 ≈ 54 → calculator
faithful. The +12 engine-vs-Elmhurst is a build/input gap (cert size-1 small cylinder
unrepresentable in Elmhurst's Normal/110L-minimum entry → higher HW + reduced-field
16.0 defaults). Pinned engine 66.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The SAP/EI rating is computed on UK-average weather (Appendix U Tables
U1-U3 region 0) so ratings are nationally comparable, but Appendix U
paragraph 1 (PDF p.124) requires that "other calculations (such as for
energy use and costs on EPCs) are done using local weather. Weather data
for each postcode district are taken from the PCDB". `Sap10Calculator.
calculate` ran ONE cascade (UK-average) and fed it to SAP, CO2 AND primary
energy, so every cert's EPC-displayed CO2/PE were computed on the wrong
climate. Because most of England is warmer than the UK-average, this
systematically OVER-counted heating demand on the emissions/PE outputs.
The two cascades (`cert_to_inputs` rating, `cert_to_demand_inputs`
postcode) already existed; this wires the demand cascade into the
production entry point and grafts its CO2/PE onto the rating result (SAP
unchanged). The corpus gauge's longstanding +5% CO2/PE over-estimate was
mostly this climate bug, NOT (as previously diagnosed) per-cert mapper
fidelity:
CO2 MAE 0.26 -> 0.12 t/yr (bias +0.18 -> +0.04)
PE MAE 13.6 -> 3.8 kWh/m2 (bias +9.0 -> +0.24)
SAP within-0.5 = 69.7% (rating cascade, unchanged)
Worksheet-validated to 1e-4 on simulated case 45 (heat-pump ground-floor
flat, postcode W6): the P960 prints the current dwelling twice — Block 1
on UK-average weather (SAP 60.5318, CO2 692.13) and Block 2 on postcode
weather (CO2 626.78, PE 6581.59). Both reproduce exactly. Added a tracked
case-45 Summary fixture + two-cascade cascade pin as a permanent guard,
and ratcheted the corpus CO2/PE ceilings to 0.13 / 4.2. The e2e Elmhurst
suite (Block-1 line refs) now pins the rating cascade directly; the two
Vaillant overlay snapshots refreshed to demand-cascade CO2/PE.
pyright not installed in this codespace (strict gate not run locally);
change is type-trivial (dataclasses.replace over SapResult).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP 10.2 §2 (17)-(18): a measured/design air permeability at 50 Pa from a
Blower Door test routes infiltration via `(18) = AP50/20 + (8)`, in
preference to the components-based (16) estimate. The Elmhurst extractor
read only the AP4 ("Pulse") column of §12.2, so a Blower Door result
(§12.2 "Pressure Test Result (AP50)") fell through to the structural-
infiltration default — over-counting ventilation heat loss.
Surfaced by simulated case 44 (AP50 4.50): effective air change rate was
0.81 vs the worksheet's 0.58 (+38% ventilation loss). The cascade already
supports `air_permeability_ap50` (preferred over AP4); this wires the read
end to end (extractor → ElmhurstSiteNotes → SapVentilation → cert_to_inputs).
Pinned against the case-44 P960 §2 at abs=1e-4: (18) infiltration 0.3417
(= 4.5/20 + 0.1167) and (25) Jan effective ach 0.5812. Worksheet harness
stays 47/47 0-raised.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Schema coverage (datatypes/epc/domain/mapper.py):
- SAP-Schema-18.0.0: full-SAP shape ≡ 17.1 → from_sap_schema_17_1, no normalisation.
- SAP-Schema-16.0: same reduced-field 16.x path; default the omitted `tenure`
field in _normalize_sap_schema_16_x (metadata; SAP cascade never reads it).
Genuinely sparse 16.x certs (missing core fabric fields) still fail loud.
- Regression tests + sap_18_0_0.json / sap_16_0.json fixtures; 0 new pyright errors.
Autonomous triage of the worklist (scripts/hyde/autonomous_run_findings.md):
- Found + diagnosed 2 bugs (flagged, NOT fixed): (1) MAPPER — full-SAP openings
lodged in mm read as m → multi-million-m2 windows → SAP clamps to 1 (uprn_
10093117227 / 10090317693 / 10091636031); (2) CALCULATOR — database heat-pump
fuel code 39 mis-priced as gas, over-rates ~14 (uprn_10093114053).
- Most certs map within +/-4 of lodged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- SAP-Schema-16.3: same reduced-field RdSAP shape as 16.2 — generalise the
normaliser to _normalize_sap_schema_16_x and route both 16.2/16.3 through it.
uprn_44012843 maps → SAP 79 (lodged 81).
- SAP-Schema-17.0: structurally identical to the full-SAP 17.1 schema (measured
sap_opening_types), so it parses with the 17.1 dataclass and reuses
from_sap_schema_17_1 with no normalisation. uprn_10023444324 → 80, uprn_
10023444320 → 81.
- Regression tests (16.3 dispatch, 17.0 dispatch) + sap_16_3.json / sap_17_0.json
fixtures; 0 new pyright errors. All 7 e2e UPRNs now map.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
SAP-Schema-16.2 (datatypes/epc/domain/mapper.py):
- 16.2 is structurally an RdSAP-17.1 cert under a different name; add
_normalize_sap_schema_16_2 (field renames + defaults) and dispatch to the
tested from_rdsap_schema_17_1 mapper. uprn_100020933699 maps → SAP 71.
- Honour a "Single glazed" windows description when multiple_glazing_type="ND"
(was defaulting to double) → RdSAP-21 code 5; eng 72→71 (lodged 70).
- 4 regression tests + sap_16_2.json fixture; 0 new pyright errors.
Flat party-wall fix (domain/sap10_calculator/worksheet/heat_transmission.py):
- Full-SAP flats carry flatness in dwelling_type, not property_type, so the
party-wall default fell through to the 0.25 house value instead of the RdSAP
Table-15 flat 0.0. Add _is_flat_or_maisonette_dwelling fallback + regression
test. uprn_10093116529 80→81 (matches the cert's lodged party u_value 0).
Accuracy corpus pins (tests/domain/sap10_calculator/test_real_cert_sap_accuracy.py):
- uprn_10093116543 (SAP-17.1 gas-combi semi): engine 81 (Elmhurst 77; documented
full-SAP→RdSAP residual — measured wall/floor U + PCDB boiler vs RdSAP defaults).
- uprn_10093116529 (SAP-17.1 g/f flat): engine 81 (Elmhurst 78).
devcontainer: add poppler-utils (pdfinfo) for the documents-parser PDF fixtures.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Wire the non-separated conservatory into the §3 heat-transmission +
§1 dimensions cascade per RdSAP 10 §6.1 (PDF p.49) + Table 25 (p.51):
"The floor area and volume of a non-separated conservatory are added to
the total floor area and volume of the dwelling. Its roof area is taken
as its floor area divided by cos(20°), and wall area is taken as the
product of its exposed perimeter and its height. ... The conservatory
walls and roof are taken as fully glazed ... Glazed walls are taken as
windows, glazed roof as rooflight."
New `worksheet/conservatory.py` derives the geometry:
- height from the equivalent storey count (§6.1: 1 storey → ground-floor
room height; 1½ → ground + 0.25 + 0.5×first; etc.);
- glazed WALL → window (27) at Table 25 U (double 3.1 / single 4.8) with
the §3.2 curtain resistance (R=0.04) → U_eff 2.758;
- glazed ROOF → rooflight (27a) at Table 25 roof U (double 3.4 / single
5.3) + curtain → U_eff 2.993;
- FLOOR → (28a) via BS EN ISO 13370 as an uninsulated SOLID ground floor
with 300 mm walls (§5.12, spec p.43), exposed perimeter = glazed
perimeter → U 0.89;
- glazed wall + roof + floor areas join (31)/(36); the fully-glazed
structure walls/roof add nothing (the glazing IS the window/rooflight).
`dimensions_from_cert` adds the conservatory floor area to TFA (4) and
floor area × height to volume (5) (feeds ventilation (8)), without making
it a storey (avg storey height for §2 infiltration is unchanged).
Pinned against the simulated case-44 P960 §3 at abs=1e-4 — every line ref
EXACT: (4) 95.3800, (5) 257.1630, (27) 96.1169, (27a) 38.2201, (28a)
21.4164, (29a) 35.5852, (30) 7.4688, (31) 294.2900, (33) 207.3274,
(36) 23.5432. The remaining whole-dwelling SAP/CO2 gap is the §6 solar
gains, closed in the next slice. Worksheet harness stays 47/47 0-raised.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RdSAP 10 §6.1 (PDF p.49) models a non-separated (heated) conservatory as
part of the dwelling. Until now the Summary §5 block was reduced to an
inert `has_conservatory` bool and the geometry (floor area, glazed
perimeter, glazing, storey height) was dropped on both paths.
Plumbing only — no cascade consumer yet (Slices B/C/D wire §3/§6):
- ElmhurstSiteNotesExtractor reads the §5 Conservatory block into a new
`Conservatory` site-notes record (scoped to §5 so the generic
"Floor Area"/"Room Height" labels can't collide with §4 dimensions);
- domain gains a frozen `SapConservatory` (floor area, glazed perimeter,
double/single glazing, thermally-separated guard, equivalent storey
count) on `EpcPropertyData.sap_conservatory`;
- the Elmhurst mapper threads it through, dropping SEPARATED
conservatories per §6.2 ("A separated conservatory ... is disregarded").
Verified against the simulated case-44 Summary (RefNo 001431): extracts
floor_area=12.0, glazed_perimeter=9.0, double_glazed=True, 1 storey.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Golden regression fixture for the multi-feature dwelling that surfaced the
two Elmhurst-extractor bugs in a33707f8. case 43 is a 2-BP mid-terrace with
a DETAILED room-in-roof (two slopes, two flat ceilings, party + exposed
gables, two common walls), a MIXED-insulation multi-section roof (Main
insulated + Extension uninsulated 2.30), a DRY-LINED extension solid wall,
a mains-gas boiler (102 / control 2106) and a House-coal solid-fuel
secondary (633).
Routes the Summary PDF through the WHOLE extractor + mapper + calculator
pipeline (no hand-built EpcPropertyData) and pins the §3 fabric + SAP-rating
block at abs=1e-4: (29a) walls 74.5800, (30) roof 38.5008, (33) fabric
172.7844, continuous SAP 73.2332 = (258), CO2 3518.3037 = (272). Guards the
detailed-RR slope/common_wall surfaces, the dry-lining R=0.17 adjustment,
and the per-part mixed-roof billing together. Summary mirrored to
backend/documents_parser/tests/fixtures/Summary_001431_case43.pdf; provider
module mirrors the _case6/_case21 pattern, assertion in
test_section_cascade_pins. Harness 47/47; regression = the 3 pre-existing
fails; pyright net-zero.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two compensating Summary-extractor bugs surfaced by simulated case 43 (a
2-BP mid-terrace with a detailed room-in-roof + a dry-lined extension wall).
Their fabric errors nearly cancelled (walls net −0.76 W/K), hiding both
behind a deceptively small +0.05 SAP delta.
Bug 1 — main/extension wall dry-lining never read. The §7 "Dry-lining:
Yes/No" line was parsed only for ALTERNATIVE walls; the main/extension
WallDetails dropped it, so a dry-lined solid wall was billed at its
un-adjusted base U. RdSAP 10 §5.8 + Table 14: a dry-lined uninsulated wall
adds R=0.17 → U = 1/(1/U_base + 0.17). Case 43 Ext1: solid brick 1.70 →
1.32. Added `WallDetails.dry_lined`, read it in the extractor (both the
main-wall builder and the As-Main copy), threaded it to the domain
`wall_dry_lined` (emit None when undried — cascade-equivalent to False,
keeps the field absent for the non-dry-lined majority).
Bug 2 — the LAST room-in-roof surface row's U over-read. The per-row token
scan stops at the next RIR-row name; the final surface (no successor) over-
read into the following section, shifting the trailing-token slotting and
silently zeroing its `default_u` (case 43 Common Wall 2: 1.90 → 0.00 → the
2.4 m² common wall billed at U=0 instead of the main-wall 1.90). Stop the
scan at the row's natural end — the "Yes"/"No" u_value_known flag plus the
trailing u_value numeric.
Case 43 now reproduces the P960 EXACTLY: (29a) walls 74.5800, (33) fabric
172.7844, continuous SAP 73.2332 = (258), CO2 3518.30 = (272), all <1e-4
(was SAP +0.0455 / CO2 −8.04). Harness 47/47 0 raised; regression = the 3
pre-existing fails; pyright net-zero (51=51).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
`u_roof` only implemented the joist column, so roofs lodged insulated at
rafters (`roof_insulation_location == 1`) were mis-billed at the joist U
on both the API and Summary paths — under-stating loss, over-rating SAP.
RdSAP 10 §5.11.2 Table 16 (spec p.42-43) gives a distinct "insulation at
rafters" column (2): the rafter cavity is shallower than a loft void, so
the same depth yields a higher U (200 mm: rafters 0.29 vs joists 0.21).
§5.11 Table 18 (p.45) likewise carries a rafters column (2) for unknown /
as-built thickness (footnote (1): "The value from the table applies for
unknown and as built") — band A-D = 2.30, E = 1.50, F = 0.68, diverging
from the joist column's 100 mm-equivalent 0.40 default (footnote (4)).
- add `_ROOF_RAFTERS_BY_THICKNESS` (Table 16 col 2) + `_ROOF_RAFTERS_BY_AGE`
(Table 18 col 2) to rdsap_uvalues; `u_roof` selects them via a new
`insulation_at_rafters` flag (ignored for flat / sloping-ceiling roofs).
- `heat_transmission` derives the flag PER BUILDING PART from
`roof_insulation_location` (gov-API int 1 / Summary "R Rafters"), which
also fixes the multi-part dedup-roof-join problem: each part's own
location now drives its U, replacing the unattributable joined
`epc.roofs[]` description.
Worksheet-validated to 1e-4: simulated case 41 (4-bp — Ext1 rafters 200mm
→ 0.29, Ext3 rafters As-Built band F → 0.68; roof total 24.8350) and case
42 (6 variants — rafters 50mm → 0.88, rafters unknown band C → 2.30,
joists/none unchanged). Case 40 stays exact (roof 35.340, total 441.1606);
worksheet harness 47/47.
Corpus within-0.5 66.9% → 66.5% (gates 0.65/1.08 hold) — a spec-correct
shift, NOT a regression: all 15 corpus rafter certs carry redacted (None)
thickness yet lodge roof EER 2-4 (insulated), so the open API blanked a
specified thickness and the spec's unknown-rafter 2.30 default correctly
over-states them. Recovery needs a roof-EER→thickness inference on the
API path (follow-up), not a change to the U-table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Elmhurst Summary §15.1 lodges "Cylinder Size: Value known" with the
measured volume in the "Cylinder Volume (l)" line — the Summary-path
equivalent of the gov-API "Exact" descriptor. The mapper had no entry for
"Value known" so `_elmhurst_cylinder_size_code` raised UnmappedElmhurstLabel,
and even once mapped the measured volume was never threaded through, so the
cascade dropped the cylinder storage loss (~468 kWh/yr) from (219) water
heating on every measured-volume-cylinder Summary.
Per RdSAP 10 §10.5 Table 28 (p.55) a measured cylinder volume is used
directly. Map "Value known" → cascade code 6 (Exact) and thread the §15.1
"Cylinder Volume (l)" value into SapHeating.cylinder_volume_measured_l, which
`_cylinder_volume_l_from_code` (cert_to_inputs.py:5281) already reads for
code 6 — mirroring the gov-API path (mapper.py:1575/1885).
Pins simulated case 39 (P960-0001-001431): an age-A mid-terrace on direct-
acting electric room heaters (SAP code 691, cat 10, control 2602) with
electric-immersion DHW off a 117 L "Value known" cylinder. The full
extractor→mapper→calculator cascade now reproduces the worksheet's SAP-rating
block EXACTLY — SAP value 36.6365 (band F) and (272) CO2 2056.0731 kg/yr,
with (219) water heating 2637.5049 and (255) total energy cost 1802.0039.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reduced-field window U: heat_transmission derived the synthesised-window
raw U from u_window(all None) -> the 2.5 placeholder regardless of glazing.
Now routes the (uniform) glazing_type code through u_window (RdSAP Table 24)
so e.g. double pre-2002 reads 2.8, not 2.5. Only the pre-SAP10 reduced-field
path is affected (21.0.1 certs carry per-window U upstream) — the RdSAP-21.0.1
corpus gauge is unchanged at 66.9% within-0.5.
test_real_cert_sap_accuracy: pin uprn_10002468137 (RdSAP-17.1, all-electric
storage heaters) at SAP 61, validated against Elmhurst on identical inputs
(dual off-peak immersion, 110 L cylinder, 2 baths). Our engine reproduces
Elmhurst's fuel cost to the penny; lodged 55 is the old SAP-2012 schema.
Tooling to grow the accuracy corpus:
- scripts/fetch_real_life_epc_sample.py — capture a cert by UPRN into the corpus.
- scripts/compare_epc_paths.py — diff gov-API vs Elmhurst-summary EpcPropertyData
and run both through the engine, localising mapper vs calculator differences.
- skill validate-cert-sap-accuracy — the end-to-end loop (capture -> Elmhurst
inputs -> human builds -> compare -> reconcile -> pin in the test).
- skill epc-to-elmhurst-rdsap-inputs reference: corrected immersion (code 1=dual),
cylinder size (code 2 = Normal/110 L), and bath-count (WWHRS sub-tab) mappings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The realistic re-generation of case 37 (code-117 gas boiler, control 2102,
+ a MAINS-GAS condensing gas-fire secondary code 611, vs case 37's biogas
605). The full extractor -> mapper -> calculator pipeline reproduces the
worksheet's SAP-rating block EXACTLY: continuous SAP 60.9152 (Δ 2e-5) and
(272) CO2 5801.0770 (Δ ~0). This confirms the boiler-efficiency /
control-2102 −5pp interlock / secondary-fuel handling are all correct, and
that case 37's +7 gap was purely the biogas sub-fuel the Summary export
cannot carry.
Summary mirrored into backend/documents_parser/tests/fixtures so the pin
runs without the unstaged workspace. PE not pinned — it is a separate
DPER block (different scope) already guarded by the corpus PE gauge.
Worksheet harness 47/47 unchanged; pyright net-zero.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
