Manually verified in pashub (Khalim, 2026-07-14): deal 499584755922
(9 Council Houses, CW5 8AP) is F33, not the stale D67 — our computed 34.0
was right within a point; deal 499617935574 (Brightholme, 14 North Road)
is the accredited E43, not the preliminary 53. 58 Hackle Street (D58) and
16 Bingley Close (E52) were confirmed correct, so our +7.8/+5.7 deviations
there are extraction bugs to hunt next. Harness MAE 1.684 -> 1.551; ceiling
ratcheted to 1.56.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The extractor now captures "Heating System (Other):" and the mapper resolves
it to the Table 4a code (301, community boilers) + Table 12 community fuel
(51 via the shared _resolve_community_heating_fuel_code), so
is_heat_network_main routes the DLF / standing-charge / 80%-efficiency
branch instead of pricing the dwelling as an ordinary mains-gas boiler
(fixture 507644414148: +14.3 over-rate closes by ~8.6). Harness MAE
1.726 -> 1.684; ceiling ratcheted to 1.70.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two dig-confirmed defects in the fresh RIR mapping (499617935574 overshot
-9): the roof-space-level insulation (Joists/200mm) was never threaded into
the RIR surfaces, so slopes/commons/flat ceilings fell to the Table 18
"unknown" full-uninsulated 2.30 default; and common walls were mislabeled
"common_wall" (a Simplified-Type-2-only concept) instead of the Detailed-mode
stud_wall every worksheet-validated fixture uses. 44.0 -> ~50.3 on the target
fixture; harness MAE 1.748 -> 1.726.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
_parse_room_in_roof captures the RdSAP §3.10 block (age range, floor area,
gables with Exposed/Party type, slopes, common walls, flat ceiling as
length x height) on main and extension roof spaces; both part builders now
carry it to sap_room_in_roof (issue #1590 bug 5 — closes the last #1590
subtask). Harness MAE 1.748 (754917 corrects to pashub's own pre-SAP; RIR
surfaces now billed per-surface instead of as insulated loft).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
_pashub_room_in_roof mirrors _api_build_room_in_roof: every surveyed RIR
surface (gable typed Exposed/Party per Table 4, slopes, common walls, flat
ceiling) becomes a detailed_surfaces entry of length x height, so the
cascade bills exact RIR surfaces instead of treating the shell as
well-insulated loft (issue #1590 bug 5).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
PasHub surveys never lodge a basement wall, but "System Build (i.e Any
Other)" maps to wall code 6 — the gov-API basement sentinel — and with
wall_is_basement left None the dwelling silently routed through the basement
wall/floor U-value cascade (issue #1590 bug 7). Both part builders now pin
the flag False. Harness MAE 1.732 -> 1.727.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
"Normal (90-130 litres)"->2, "Large (>170 litres)"->4; "No Access" follows
RdSAP 10 Table 28 p.55 (otherwise-branch 110L for a main-fed cylinder;
electric-immersion No Access strict-raises until meter context is plumbed).
The raw band string was int-or-noned by _cylinder_volume_l_from_code, skipping
the Table 28 volume convention (issue #1590 bug 6). Golden block updated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The surveyed "Ventilation type" label never reached
mechanical_ventilation_kind, so ventilation_from_cert silently defaulted every
mechanical system to NATURAL (24d), dropping its ACH heat loss — 76/205
cohort fixtures lodge dMEV/MEV/PIV (issue #1590 bug 4). Mapping mirrors the
gov-API _API_MECHANICAL_VENTILATION_TO_KIND table (PIV-from-loft is
"as natural"). Harness: within-0.5 12.2% -> 18.5%, MAE 2.538 -> 1.730 — the
campaign's largest single move; floors ratcheted to 0.18 / 1.75.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
"Not connected to electricity meter" -> 1 (zero Appendix M credit), "Connected
to dwellings electricity meter" -> 2; the raw string fell through the credit
gate's non-int branch to True, crediting a separately-metered array (issue
#1590 bug 3, fixture 499516101839 -6.9 SAP). Harness MAE 2.571 -> 2.538;
ceiling ratcheted to 2.55.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
"Photovoltaic array kWp Known? Yes" lodges a per-system block (kWp, pitch,
orientation, overshading) instead of the percent-roof estimate; the extractor
only read the estimate, so measured PV never reached the mapper and the
Appendix M credit was silently zero (issue #1590 bug 1). Harness MAE
2.632 -> 2.571 (fixture 507639151843's 13.5-SAP under-rate closes to +0.5);
ceiling ratcheted to 2.58.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
_pashub_pv_arrays mirrors _elmhurst_pv_arrays, reusing its format-agnostic
pitch/orientation/overshading converters (PasHub lodges "South East"
space-separated; normalise to the octant map's hyphenated keys). Wired into
the SapEnergySource construction so the calculator's Appendix M generation
path sees measured PV instead of silently zero credit (issue #1590 bug 1).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
"Insulation At: None" is the assessor recording zero loft insulation, not an
unknown — with thickness left None, u_roof fell through to the age-band
"assumed insulated" default (0.16 W/m²K at band J/K) instead of the Table 16
uninsulated row (2.30), understating roof loss ~14x (issue #1590 bug 2).
Harness MAE 2.701 -> 2.632 (the two ~7-SAP roof over-raters correct exactly);
ceiling ratcheted to 2.64.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
scripts/run_pashub_modelling.py invokes the modelling_e2e handler in-process
over a portfolio using STORED EPCs (refetch_epc=False — the correct source for
PasHub cohorts, issue #1589), parametrised by env (portfolio/scenario/pids/
dry-run/batch). Handover documents the 3 re-extraction stragglers, the
rebaseliner pass-through gotcha (effective_sap_score IS the pashub rating for
unchanged lodged EPCs — never validate the calculator against it), and the 7
root-caused extractor bugs now tracked in #1590.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two hubspot_deal_data corrections: 499539910905 D58->B82 (confirmed bad row)
and one C73->C75. Rebuilt via scripts/build_pashub_accuracy_fixtures.py
(no --force; PDFs unchanged).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Secondary fuel 'Mains gas'/'Mains Gas'->26 and 'House Coal'->11 (Table 32);
main-heating control resolution becomes group-aware with a Table 4e Group 3
map ('Charging system linked to use of community heating, room thermostat
only' -> 2306, the code the accredited Elmhurst certs lodge for this cohort;
all four linked-to-use codes are calculation-identical). All 205 Guinness
fixtures now compute (was 201/4 xfails); ratchet re-baselined to the
full-coverage aggregate (12.2% within-0.5 floor, MAE ceiling 2.71) with the
two newly-computable outliers documented for verification.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Table 4e is organised by heating-system family and the same control label
recurs across groups under different 2xxx codes, so the boiler (Group 1) map is
gated behind a boiler system_type; any other system strict-raises rather than
silently taking a boiler code. Adds a guard that every mapped code exists in the
calculator's _CONTROL_TYPE_BY_CODE inventory.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
