mirror of
https://github.com/Hestia-Homes/Model.git
synced 2026-06-08 11:17:27 +00:00
1cb85c592f
SAP 10.2 Table 11 (PDF p.188) "Fraction of heat supplied by
secondary heating systems" — the "Electric storage heaters (not
integrated)" row splits by Table 4a sub-type:
- not fan-assisted: 0.15
- fan-assisted: 0.10
- high heat retention (as defined in 9.2.8): 0.10
Plus separate rows:
Integrated storage/direct-acting electric systems: 0.10
Electric room heaters: 0.20
Other electric systems (e.g. underfloor): 0.10
Cross-referenced with SAP 10.2 Table 4a (PDF p.166) Electric
storage codes:
401: Old (large volume) storage heaters — not fan-assisted
402: Slimline storage heaters — not fan-assisted
403: Convector storage heaters — not fan-assisted
404: Fan storage heaters — fan-assisted
405: Slimline + Celect — not fan-assisted
406: Convector + Celect — not fan-assisted
407: Fan + Celect — fan-assisted
408: Integrated storage + direct-acting — "Integrated"
409: High heat retention — HHR
421: Underfloor heating — "Other electric"
Pre-slice the cascade defaulted `_secondary_fraction` to 0.10 for
every forced electric-storage code (Elmhurst mapper leaves
`main_heating_category=None`, dispatch falls through to the
`_SECONDARY_HEATING_FRACTION_DEFAULT` 0.10), missing the 0.15
not-fan-assisted sub-row on codes 401/402/403/405/406.
Two compounding spec-citable fixes:
(a) New `_SECONDARY_FRACTION_BY_ELECTRIC_STORAGE_CODE` dispatch dict
consulted before the category-based lookup in
`_secondary_fraction`. Routes each Table 4a 4xx code to its
Table 11 sub-row fraction.
(b) Code 408 removed from `_FORCE_SECONDARY_FOR_MAIN_CODES`.
SAP 10.2 §A.2.2 (PDF p.~189) verbatim: "This applies to main
heating codes 401 to 407, 409 and 421" — 408 is explicitly
NOT in the spec's forced list. The integrated storage+direct-
acting heater's direct-acting element acts as the secondary
already, so the calculation doesn't add another.
Corpus impact (electric variants — Elmhurst mapper path):
- electric 3 (SAP 401): sec_frac 0.10 → 0.15; CO2 -117.84 →
-108.88; PE -1121.97 → -1093.18. SAP / cost residual unchanged
because the off-peak meter routes the cost calc through the
`_ZERO_FUEL_COST_FOR_OFF_PEAK` sentinel + legacy scalar-field
math which bills main and secondary at the same off-peak low
rate (7.41 p/kWh) — main-vs-secondary split is cost-neutral.
- electric 5 (SAP 402): sec_frac 0.10 → 0.15; CO2 -11.08 → -2.48;
PE -161.03 → -133.36. Same cost-invariance.
- electric 7 (SAP 408): forced-secondary removed → cascade secondary
fuel kWh 891 → 0 (matches worksheet); CO2 -37.86 → -53.57;
PE -498.47 → -549.37. SAP residual unchanged (same off-peak
cost-invariance).
- electric 4/6/8/9: no change (categories 404/409/421 keep their
existing 0.10 dispatch).
The remaining +2.55 SAP residual on electric 3 (+1.29 on electric 7)
is now confirmed to be driven by space-heating DEMAND undercount
(cascade SH demand 10083 kWh vs worksheet 11088 kWh for electric 3;
8914 vs 9529 for electric 7), not by sec_frac dispatch. That's a
separate slice — likely §9 MIT calc or §8 gains/HLC for storage-
heater R values, follow-up after this slice.
Extended handover suite: 887 pass, 0 fail (was 886 + 1 new AAA test).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|---|---|---|
| .. | ||
| handler | ||
| tests | ||
| __init__.py | ||
| db_writer.py | ||
| elmhurst_extractor.py | ||
| extractor.py | ||
| local_runner.py | ||
| parser.py | ||
| pdf.py | ||